{"product_id":"cicada-audio-cmw10-s2-10-inch-mid-woofer-2-ohm","title":"Cicada Audio CMW10.S2 – 10\" Mid-Bass Woofer (2Ω, 300W RMS, Carbon Matrix Composite)","description":"\u003ch2\u003eA 10\" 2Ω mid-bass woofer for Harley-Davidson® saddlebag builds – 300W RMS and 91dB from a Carbon Matrix Composite™ cone\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Cicada Audio CMW10.S2 is a 10-inch 2Ω mid-bass woofer rated at 300W RMS (600W peak), with 91dB sensitivity and a 50Hz–6kHz response. It pairs a Carbon Matrix Composite™ cone with a 51mm (2.0\") edge-wound aluminium voice coil, a Y35 ferrite motor, an NBR half-roll surround and a powder-coated stamped steel basket with Vortex Flow Venting™. Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe CMW10 sits below Cicada's high-power \u003ca href=\"\/products\/cicada-audio-cmb10-s4-midbass-10-inch\"\u003eCMB10.S4\u003c\/a\u003e in the 10\" range. The CMB10 is built for 800W and serious SPL. The CMW10 is built for efficiency and range: 91dB against the CMB10's 87.2dB, and an upper response that reaches 6kHz. It makes more sound per watt from a moderate amplifier, and it can be crossed higher so it blends with the speakers above it. This is the 2Ω version; the \u003ca href=\"\/products\/cicada-audio-cmw10-s4-10-inch-mid-woofer-4-ohm\"\u003eCMW10.S4\u003c\/a\u003e is the 4Ω version for bridged channels.\u003c\/p\u003e\n\n\u003ch3\u003eWho This Is For\u003c\/h3\u003e\n\n\u003cp\u003eRiders adding a 10\" mid-bass stage to the saddlebags who want real weight in the lower range without committing to an 800W amplifier and the wiring that goes with it. The 2Ω coil suits a four-channel amp running a mid-bass pair in stereo at 2Ω, or a mono amp with two drivers wired in series. If you're building for maximum output and have the power to back it, the \u003ca href=\"\/products\/cicada-audio-cmb10-s4-midbass-10-inch\"\u003eCMB10.S4\u003c\/a\u003e is the step up. If the bags only have room for an 8\", see the \u003ca href=\"\/products\/cicada-audio-cmw8-s2-8-inch-mid-woofer-2-ohm\"\u003eCMW8.S2\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Is Best For\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMid-bass from a four-channel amp\u003c\/strong\u003e – at 2Ω in stereo, the \u003ca href=\"\/products\/cicada-audio-wx1200-4pro-waterproof-4-channel-dsp-amplifier\"\u003eWX1200.4PRO\u003c\/a\u003e gives 300W per channel, an exact match for this driver's rating. The \u003ca href=\"\/products\/cicada-audio-wx900-4-waterproof-4-channel-amplifier\"\u003eWX900.4\u003c\/a\u003e gives 225W with margin in hand.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA pair on a mono amp\u003c\/strong\u003e – wire two CMW10.S2 in series and the pair presents 4Ω. The \u003ca href=\"\/products\/cicada-audio-wx1000-1-waterproof-mono-subwoofer-amplifier\"\u003eWX1000.1\u003c\/a\u003e then delivers 500W, or 250W per driver, safely inside the 300W rating. Never wire two in parallel: that's 1Ω.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficiency where power is limited\u003c\/strong\u003e – 91dB means each watt goes further. That matters on a charging system that is already running a four-channel amp for the fairing and bags.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA clean hand-off to the speakers above\u003c\/strong\u003e – with response to 6kHz, the CMW10.S2 stays smooth through the crossover region rather than falling away just above it. You can set the low-pass where it suits your fairing and lid speakers, not where the woofer runs out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"maa-alert\"\u003e\n  \u003ch3\u003eWiring the CMW10.S2 – Stereo, Series or Not at All\u003c\/h3\u003e\n  \u003cp\u003eOne CMW10.S2 per channel on a 2Ω-stable amp in stereo is the simplest setup. Two on one mono channel must be wired in series, giving 4Ω. Wired in parallel they drop to 1Ω, which is below most motorcycle amps' rating. Never bridge a 2Ω driver, because each channel of a bridged pair sees half the load. If your plan involves bridging, choose the \u003ca href=\"\/products\/cicada-audio-cmw10-s4-10-inch-mid-woofer-4-ohm\"\u003eCMW10.S4\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eThe Bottom Line\u003c\/h3\u003e\n\n\u003cp\u003eThe CMW10.S2 brings 10\" mid-bass to a Harley saddlebag build without needing a big amp: 300W RMS, 91dB, and a response wide enough to blend with the rest of the system. Pair it with Cicada's 10\" ring kit for your year, or tell the \u003ca href=\"\/pages\/build-your-system\"\u003eSystem Builder\u003c\/a\u003e your model and year and we'll match the whole system and price it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStreet Glide®, Road Glide®, Electra Glide® and Ultra Limited (with \u003ca href=\"\/products\/cicada-14hdring10-10-inch-saddlebag-mid-bass-woofer-mounting-kit-2014-2023\"\u003e14HDRING10\u003c\/a\u003e mounting kit)\u003c\/td\u003e\n\u003ctd\u003eSaddlebag\u003c\/td\u003e\n\u003ctd\u003e2014–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStreet Glide®, Road Glide® and Ultra Limited (with \u003ca href=\"\/products\/cicada-24hdring10-10-inch-mid-bass-ring-grille-kit-2024-plus-harley\"\u003e24HDRING10\u003c\/a\u003e ring and grille kit)\u003c\/td\u003e\n\u003ctd\u003eSaddlebag\u003c\/td\u003e\n\u003ctd\u003e2024–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCustom enclosures built for a 10\" driver\u003c\/td\u003e\n\u003ctd\u003eCustom enclosure\u003c\/td\u003e\n\u003ctd\u003eAny\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\n\u003chr class=\"maa-tab-split\"\u003e\n\n\u003ch3\u003eWhat's Inside the CMW10.S2\u003c\/h3\u003e\n\n\u003cp\u003eThe cone is \u003cstrong\u003eCarbon Matrix Composite™ (CMC™)\u003c\/strong\u003e, light enough to start and stop quickly and stiff enough to stay in shape across a 10\" span under power. \u003cem\u003eOn the road: bass notes land with a defined edge rather than a boom, even with the throttle open.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e51mm (2.0\") voice coil\u003c\/strong\u003e is \u003cstrong\u003eedge-wound aluminium\u003c\/strong\u003e on a lightweight \u003cstrong\u003eTIL composite former\u003c\/strong\u003e, sealed in \u003cstrong\u003eBlack Coat™ high-temperature thermoset resin\u003c\/strong\u003e. Edge-wound flat wire packs more conductor into the gap, and aluminium keeps moving mass low, which is part of how this driver reaches 91dB. \u003cem\u003eOn the road: more output for the same amplifier setting.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eA \u003cstrong\u003eY35 ferrite motor\u003c\/strong\u003e provides a consistent magnetic field that is stable with temperature. The \u003cstrong\u003eVortex Flow Venting™\u003c\/strong\u003e basket moves air across the coil as the cone travels. \u003cem\u003eOn the road: summer heat in a black saddlebag doesn't knock the output back.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eAn \u003cstrong\u003eNBR half-roll surround\u003c\/strong\u003e controls excursion and resists weather. The \u003cstrong\u003epowder-coated stamped steel basket\u003c\/strong\u003e keeps the assembly rigid and protected. The \u003cstrong\u003eRain or Shine™\u003c\/strong\u003e construction resists humidity, rain and UV. \u003cem\u003eOn the road: built for a position that gets wet and sits in the sun.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhy 2Ω\u003c\/h3\u003e\n\n\u003cp\u003eA 2Ω driver lets a 2Ω-stable amplifier deliver its highest stereo rating, which is where most four-channel motorcycle amps make their best power. It also gives a clean 4Ω load when two are wired in series on a mono amp. The trade-off is that it must never be bridged or paralleled below the amp's minimum load.\u003c\/p\u003e\n\n\u003ch3\u003eFrequency Coverage and Tuning\u003c\/h3\u003e\n\n\u003cp\u003eResponse runs 50Hz to 6kHz (±3dB). In most saddlebag systems the CMW10.S2 covers the upper bass and lower midrange, crossed to the speakers above with a low-pass filter. Set a high-pass (subsonic) filter just below the lowest frequency your enclosure can usefully reproduce, so the cone isn't driven into excursion it can't turn into sound. No crossover is included; the split is set at the amplifier or DSP.\u003c\/p\u003e\n\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\n\u003cp\u003eMounting depth is 104mm (4.1\") and mounting diameter is 230mm (9.0\"). Both suit Cicada's 14HDRING10 and 24HDRING10 saddlebag ring kits.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriver Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e254mm (10\")\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriver Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMid-bass woofer (no tweeter)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling – RMS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling – Peak\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Hz – 6kHz (±3dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e91dB (1W\/1m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon Matrix Composite™ (CMC™)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurround\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR half-roll\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoice Coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e51mm (2.0\") edge-wound aluminium, TIL composite former, Black Coat™ resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMagnet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eY35 ferrite\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBasket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder-coated stamped steel with Vortex Flow Venting™\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e104mm (4.1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e230mm (9.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeather Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRain or Shine™ – moisture and UV resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone – set by amplifier or DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSold As\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndividually (one driver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Cicada Audio CMW10.S2 mid-bass woofer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cicada Audio","offers":[{"title":"Default Title","offer_id":51131700871415,"sku":"CMW10.S2","price":510.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6505\/1639\/files\/coming_soon_placeholder_890413ec-cbdc-4821-b42e-5e5306fb234e.png?v=1790807655","url":"https:\/\/www.motorcycleaudio.com.au\/products\/cicada-audio-cmw10-s2-10-inch-mid-woofer-2-ohm","provider":"Motorcycle Audio Australia","version":"1.0","type":"link"}