{"product_id":"precision-power-mas-652ht-6-5-2-ohm-high-efficiency-horn-loaded-motorcycle-speaker","title":"Precision Power MAS.652HT 6.5\" Horn-Loaded Motorcycle Speakers for Harley-Davidson® Touring","description":"\u003ch2\u003eThe highest-output 6.5\" fairing speaker that still drops into your factory location\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Precision Power MAS.652HT is a 6.5\" 2Ω horn-loaded coaxial speaker designed for direct fitment into factory fairing and Tour-Pak® speaker locations on 2014+ Harley-Davidson® Touring models. A titanium ring radiator tweeter with integrated horn and phase plug delivers 93 dB sensitivity and significantly higher forward projection than a standard dome tweeter — without requiring any fabrication or modification to the mounting position.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA horn-loaded tweeter is not an incremental upgrade over a conventional dome — it is a different approach to producing sound. The horn geometry focuses and amplifies the tweeter's output, directing high frequencies forward with more intensity and over a longer throw distance than a dome tweeter can achieve in the same space. In the context of a fairing speaker competing with wind, exhaust, and road noise at 100 km\/h, this difference is audible and significant. Vocals stay intelligible. Instrument detail does not disappear into the noise floor.\u003c\/p\u003e\n\n\u003cp\u003eThe MAS.652HT is bi-amp capable with an integrated 12 dB high-pass crossover, and a jumper is included for standard single-amplifier operation. No grilles are included; the fairing pod or Tour-Pak® housing provides the finish.\u003c\/p\u003e\n\n\u003ch3\u003eWho This Is For\u003c\/h3\u003e\n\u003cp\u003eRiders building high-output front-stage systems on 2014–2023 Harley-Davidson® Touring models who want the maximum performance achievable from a drop-in OEM fairing or Tour-Pak® location. The MAS.652HT requires a capable 2Ω-stable amplifier producing 100–200W RMS per channel, and benefits significantly from DSP control when combined with rear saddlebag speakers. If you are on factory radio power only, the standard \u003ca href=\"\/products\/precision-power-mas652-6-5-2-ohm-motorcycle-speakers\"\u003eMAS.652\u003c\/a\u003e is the appropriate choice.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum output from OEM fairing positions\u003c\/strong\u003e — The horn-loaded tweeter delivers higher SPL and better forward projection than a standard dome can achieve in the same enclosure — measurable at speed and in open-air riding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output touring front stages\u003c\/strong\u003e — At 93 dB sensitivity and 150W RMS handling, the MAS.652HT can absorb serious amplifier power and deliver the result at highway-speed listening distances without compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete MAS system builds\u003c\/strong\u003e — Pairs with the \u003ca href=\"\/products\/precision-power-mas-692ht-6x9-2-ohm-high-efficiency-horn-loaded-motorcycle-speaker\"\u003eMAS.692HT\u003c\/a\u003e rear saddlebag speakers for a cohesive, matched horn-loaded system across the full bike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-amp configurations\u003c\/strong\u003e — Dedicated tweeter terminals allow separate amplifier channels to drive the woofer and tweeter independently, with the jumper removed for true bi-amped operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"maa-alert\"\u003e\n\u003cstrong\u003eBefore You Order — Compatibility Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eAmplifier required.\u003c\/strong\u003e The MAS.652HT is designed for amplified systems only. A 2Ω-stable amplifier producing 100–200W RMS per channel is recommended. Factory head-unit power is not sufficient to realise this speaker's capability.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDSP strongly recommended.\u003c\/strong\u003e When combining front horn-loaded speakers with rear saddlebag speakers, DSP tuning is required to properly balance the system, set crossover points, and manage the directional output characteristics of the horn tweeter. Without DSP, a high-output horn-loaded front stage can produce a system that is loud but not well-balanced.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eFitment: 2014+ Touring models only.\u003c\/strong\u003e The MAS.652HT fits factory 6.5\" fairing and Tour-Pak® positions on 2014–2023 Harley-Davidson® Touring models. It is not compatible with pre-2014 fairing pods without checking dimensions.\u003cbr\u003e\u003cbr\u003e\nContact \u003cstrong\u003eMotorcycle Audio Australia\u003c\/strong\u003e for amplifier and DSP pairing recommendations before ordering.\n\u003c\/div\u003e\n\n\u003ch3\u003eThe Bottom Line\u003c\/h3\u003e\n\u003cp\u003eThe MAS.652HT is the maximum-output drop-in fairing speaker for riders who have already committed to a proper amplified Harley touring build. The horn-loaded tweeter, 93 dB sensitivity, and 150W RMS handling represent a step beyond what a standard dome coaxial can deliver in the same mounting location — and the factory fitment means you get there without fabrication.\u003c\/p\u003e\n\n\u003cp\u003eFor matched rear saddlebag output, pair with the \u003ca href=\"\/products\/precision-power-mas-692ht-6x9-2-ohm-high-efficiency-horn-loaded-motorcycle-speaker\"\u003eMAS.692HT\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003chr class=\"maa-tab-split\"\u003e\n\nTAB 2 — TECHNICAL DETAIL\n--------------------------\n\n\u003ch3\u003eWhat's Inside\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eTitanium ring radiator tweeter with integrated horn and phase plug.\u003c\/strong\u003e The MAS.652HT uses a ring radiator tweeter — a design that produces a more uniform wave front than a conventional dome, reducing colouration at high frequencies. The integrated horn geometry amplifies and focuses the tweeter's output, increasing SPL and extending the throw distance compared to a standard dome tweeter in the same space. A phase plug ensures consistent phase response across the frequency range, maintaining detail and imaging accuracy at speed. This tweeter assembly is the reason the MAS.652HT sounds different, not just louder, than a standard coaxial.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNeodymium motor with polypropylene-coated paper cone.\u003c\/strong\u003e A low-mass neodymium magnet drives a reinforced polypropylene-coated paper woofer cone — efficient enough to maximise output from a given amplifier power, and with sufficient cone stiffness to maintain controlled midbass at elevated volume levels. A 1.75\" oxygen-free copper voice coil on a thermally absorbent aluminium former handles the heat generated by sustained amplified operation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIntegrated 12 dB high-pass crossover with bi-amp capability.\u003c\/strong\u003e The internal crossover network rolls off low frequencies before they reach the tweeter, providing more aggressive tweeter protection than the 6 dB crossover used in the standard MAS coaxials — appropriate given the higher power levels this speaker is intended for. Dedicated tweeter terminals allow the crossover to be bypassed for bi-amped operation; the included jumper restores single-amplifier operation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGlass fibre reinforced ABS basket and weather-resistant rubber surround.\u003c\/strong\u003e The basket provides structural rigidity in fairing and Tour-Pak® pod applications; the rubber surround resists moisture, road spray, and the temperature cycling of an open-air vehicle. No grilles are included; the speaker is used within the existing fairing or Tour-Pak® housing.\u003c\/p\u003e\n\n\u003ch3\u003eSensitivity and Frequency Coverage\u003c\/h3\u003e\n\u003cp\u003eAt 93 dB (1W\/1m), the MAS.652HT is 1 dB more sensitive than the standard MAS coaxials — a smaller margin than the horn geometry might suggest, because the full-range sensitivity figure averages the woofer and tweeter output together. The horn's benefit is most audible in the tweeter's operating range, particularly above 3–4 kHz, where the focused projection substantially outperforms a conventional dome at typical riding listening distances. The 100 Hz – 22 kHz frequency response reflects the crossover-limited lower extension; a high-pass crossover at the amplifier set above 80 Hz is recommended to protect the woofer.\u003c\/p\u003e\n\n\u003ch3\u003eWhy 2Ω\u003c\/h3\u003e\n\u003cp\u003eA 2Ω speaker draws more current from the amplifier, which — in high-output motorcycle amplifier designs — translates to more usable power per channel in a load-stable amplifier. For the MAS.652HT, the 2Ω configuration is the correct choice for systems where the amplifier is sized correctly for the speaker's 150W RMS capability: the increased current draw is matched by an amplifier built to deliver it. Confirm that your amplifier is rated as 2Ω-stable before pairing with the MAS.652HT.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThe MAS.652HT is a direct replacement for factory 6.5\" fairing and Tour-Pak® speaker positions on 2014–2023 Harley-Davidson® Touring models. No modification, cutting, or adapters required. No grilles are included; the speaker fits within the existing fairing or Tour-Pak® housing.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStreet Glide® \/ Street Glide® Special \/ CVO Street Glide®\u003c\/td\u003e\n\u003ctd\u003e2014–2023\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; lower fairing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRoad Glide® \/ Road Glide® Special \/ CVO Road Glide®\u003c\/td\u003e\n\u003ctd\u003e2015–2023\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; lower fairing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUltra Limited \/ Road Glide® Ultra \/ Road Glide® Ultra Limited\u003c\/td\u003e\n\u003ctd\u003e2014–2023\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; lower fairing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElectra Glide®\u003c\/td\u003e\n\u003ctd\u003e2014–2023\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; lower fairing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTri Glide® Ultra\u003c\/td\u003e\n\u003ctd\u003e2014–2023\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; lower fairing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTour-Pak® equipped Touring models\u003c\/td\u003e\n\u003ctd\u003e2014–2023\u003c\/td\u003e\n\u003ctd\u003eTour-Pak® speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e165 mm (6.5 in) horn-loaded coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling (RMS)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling (Peak)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e93 dB (1W\/1m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Hz – 22 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTweeter Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTitanium ring radiator with integrated horn and phase plug\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated 12 dB high-pass (bi-amp capable, jumper included)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoice Coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75\" oxygen-free copper on aluminium former\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMagnet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCone Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene-coated paper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurround Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGlass fibre reinforced ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70 mm (2.75 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGrilles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 year through Motorcycle Audio Australia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Precision Power","offers":[{"title":"Default Title","offer_id":50686760648951,"sku":"MAS.652HT","price":765.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6505\/1639\/files\/Precision-Power-MAS_652HT-6_5-Horn-Loaded-Motorcycle-Speakers-for-Harley-Davidson-Touring.webp?v=1779071181","url":"https:\/\/www.motorcycleaudio.com.au\/products\/precision-power-mas-652ht-6-5-2-ohm-high-efficiency-horn-loaded-motorcycle-speaker","provider":"Motorcycle Audio Australia","version":"1.0","type":"link"}