Cicada Audio CH65.2v2 — 6.5" High-Efficiency Horn Coaxial Motorcycle Speakers (2Ω)
Cicada Audio CH65.2v2 — 6.5" High-Output Horn Coaxial Speakers for Harley-Davidson Motorcycle Audio Systems (2Ω)
A serious step up for riders who want horn-loaded clarity, high output and strong midbass — without the depth or power demands of full pro-audio 6.5” drivers.
The Cicada Audio CH65.2v2 is a high-efficiency 6.5-inch horn coaxial designed specifically for Harley-Davidson Touring models. With its 2Ω voice coil, upgraded v2 motor structure, lightweight treated paper cone and aluminium-dome horn tweeter, this speaker delivers outstanding projection, crisp highs and impressive midbass punch — all while working beautifully with compact motorcycle amplifiers.
The v2 update increases efficiency, cooling and power handling, making the CH65.2v2 one of the best all-round upgrades for fairing and lower-fairing locations.
Key Features
- High-output horn coaxial: Excellent projection and clarity in open-air motorcycle environments.
- 2Ω impedance: Draws more power from motorcycle amplifiers for higher real-world volume.
- Treated paper cone: Lightweight, rigid and tuned for strong midbass response.
- Aluminium horn tweeter: Razor-sharp highs that remain clear even at highway speeds.
- v2 motor upgrade: Improved airflow, cooling and overall efficiency.
- External 12 dB crossover: With optional -3 / -6 dB tweeter attenuation.
- Bi-amp capable: Tweeter can run on its own amplifier channel.
- Motorcycle-ready build: Designed to survive vibration, heat and weather exposure.
Specifications
| Cicada Audio CH65.2v2 – Technical Specifications | |
|---|---|
| GENERAL | |
| Speaker Size | 6.5" Horn Coaxial |
| Design | Horn-loaded coaxial with treated paper cone |
| Impedance | 2 Ω |
| Power Handling | 250W RMS / 500W MAX |
| AUDIO PERFORMANCE | |
| Sensitivity | 99 dB (1W / 1M) |
| Frequency Response | 75 Hz – 20 kHz (±5 dB) |
| COMPONENTS | |
| Cone Material | Water-resistant treated paper |
| Tweeter | 1.4" aluminium-dome horn tweeter |
| Mid-Bass Voice Coil | 2.0" (Black Coat™) high-temp |
| Tweeter Voice Coil | 1.4" high-temp aluminium diaphragm |
| Crossover | External 12 dB with -3 / -6 dB attenuation options |
| Magnet | N35SH neodymium |
| Basket | Die-cast aluminium with Vortex Flow Venting™ |
| PHYSICAL | |
| Mounting Depth | 3.0" (76.2 mm) |
| Cut-Out Diameter | 5.7" (145.5 mm) |
| Grilles | Not included |
| WARRANTY | |
| Coverage | 2 Years |
| ⚠️ IMPORTANT – Crossover & Setup Requirements (Read Before Installation) | |
|---|---|
|
All horn speakers have mechanical limits. Regardless of power ratings or advertised “MAX” figures, a speaker can only move so far before mechanical failure occurs. Most horn speaker failures are NOT burned voice coils. In real-world motorcycle installs, damage is typically caused by over-excursion — the speaker moving too far because it is crossed over too low. This leads to tinsel leads tearing away from the voice coil or spider. Once this happens, the speaker is permanently damaged. |
|
Required High-Pass Crossover Settings
Lower crossover points WILL cause distortion and speaker damage. |
|
|
Saddlebag & Pod Installations – Critical Note
When using 6×9 or 8-inch Pro Mid-Bass / Horn drivers inside saddlebags, internal air volume is limited. Cicada Audio strongly recommends the following DSP settings:
Never run these speakers full-range. |
|
Amplifier & Wiring Setup Notes
Always high-pass coaxial horn drivers. |
Why It Works So Well on Motorcycles
- More real-world volume: 2Ω coil extracts more wattage from your amplifier.
- Clear highs at speed: Horn tweeter cuts through wind and exhaust noise.
- Strong midbass: Treated paper cone and improved motor deliver tight punch.
- More forgiving than pro-audio 6.5” drivers: Works with a wider range of amps.
Fitment
Designed for Harley-Davidson Touring fairing & lower-fairing locations (1998–2025 depending on mounting style).
- Street Glide (1998–2025)
- Street Glide Special (2014–2023)
- Street Glide Ultra (2025)
- Road Glide (1998–2025)
- Road Glide Special (2015–2023)
- Road Glide Ultra / Limited (2015–2024)
- Electra Glide (1998–2023)
- Electra Glide Standard / Police
- Ultra Classic (1998–2019)
- Tri Glide (2009–2025)
- CVO Models (per listed compatibility)
Recommended System Matching
- Pairs exceptionally well with mid-power amps (Cicada CX, DSP or FLX series).
- Perfect for fairing applications where clarity and projection matter.
- DSP recommended for level matching and staging.
- Complements 6x9 or 8" horn-loaded rears in multi-stage systems.
Want a speaker that’s loud, clean and amplifier-friendly?
Motorcycle Audio Australia can help match the CH65.2v2 with the right amplifier and tuning setup for your Harley.
Shipping
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Return policy
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer’s responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We’ll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you’re unsure about compatibility, reach out before ordering—we’re happy to help.