Cicada Audio CH8.2W — 8" All-Weather Horn Coaxial Motorcycle Speakers (2Ω)
Cicada Audio CH8.2W — 8" All-Weather Horn Coaxial Speakers for Harley-Davidson Motorcycle Systems (2Ω)
Built for riders who want the loudest, hardest-hitting rear stage possible.
The Cicada Audio CH8.2W is an 8-inch, all-weather horn-loaded coaxial engineered for extreme-output motorcycle audio systems. Its 2Ω impedance allows modern Class-D motorcycle amplifiers to deliver maximum real-world wattage, producing higher SPL, stronger midbass and outstanding projection at highway speeds.
Designed for saddlebag pods, side panels and tour-pak audio installations, the CH8.2W combines a weather-resistant treated paper cone, a powerful horn tweeter and a robust neodymium motor structure — all built to survive Australian heat, rain, vibration and long-distance riding.
Key Features
- 2Ω impedance: Pulls full power from high-output motorcycle amplifiers.
- All-weather construction: Water-resistant cone and corrosion-resistant materials.
- Horn-loaded aluminium tweeter: Long-throw clarity that cuts through pipes and wind.
- Large 8" cone area: Delivers deep midbass and massive rear-stage presence.
- High-efficiency N35SH neo motor: Designed specifically for motorcycle SPL performance.
- Perfect for custom saddlebag pods and rear-stage builds.
Specifications
| Cicada Audio CH8.2W – Technical Specifications | |
|---|---|
| GENERAL | |
| Speaker Size | 8" All-Weather Horn Coaxial |
| Design | Horn-loaded coaxial with treated paper cone |
| Impedance | 2 Ω |
| Power Handling | 250W RMS / 500W MAX |
| AUDIO PERFORMANCE | |
| Sensitivity | 95 dB (1W / 1M) |
| Frequency Response | 75 Hz – 20 kHz (±3 dB) |
| COMPONENTS | |
| Cone Material | Water-resistant treated paper |
| Tweeter | 1.4" aluminium-dome horn tweeter |
| Mid-Bass Voice Coil | 2.5" (64 mm) high-temp Black Coat™ VC |
| Tweeter Voice Coil | 1.4" OFC copper |
| Crossover | External 12 dB crossover with optional -3 / -6 dB attenuation pack |
| Magnet | N35SH neodymium |
| Basket | Die-cast aluminium with Vortex Flow Venting™ |
| PHYSICAL | |
| Mounting Depth | 3.6" (91 mm) |
| Mounting Diameter | 7.1" (180 mm) |
| Ideal Install Locations | Saddlebag pods, side panels, tour-pak pods |
| WARRANTY | |
| Coverage | 2 Years |
| ⚠️ IMPORTANT – Crossover & Setup Requirements (Read Before Installation) | |
|---|---|
|
All horn speakers have mechanical limits. Regardless of power ratings or advertised “MAX” figures, a speaker can only move so far before mechanical failure occurs. Most horn speaker failures are NOT burned voice coils. In real-world motorcycle installs, damage is typically caused by over-excursion — the speaker moving too far because it is crossed over too low. This leads to tinsel leads tearing away from the voice coil or spider. Once this happens, the speaker is permanently damaged. |
|
Required High-Pass Crossover Settings
Lower crossover points WILL cause distortion and speaker damage. |
|
|
Saddlebag & Pod Installations – Critical Note
When using 6×9 or 8-inch Pro Mid-Bass / Horn drivers inside saddlebags, internal air volume is limited. Cicada Audio strongly recommends the following DSP settings:
Never run these speakers full-range. |
|
Amplifier & Wiring Setup Notes
Always high-pass coaxial horn drivers. |
Why Riders Choose the 2Ω Version
- Maximum loudness: Extracts the highest real-world wattage from powerful amps.
- Stronger midbass hit: Ideal for baggers running subs or passive radiators.
- Superior projection: Horn tweeter cuts through wind, pipes and road noise.
- Perfect for SPL-style or show builds needing extreme output.
Fitment
Harley-Davidson Touring saddlebag pod & rear installations (8" pods required):
- Street Glide (2014–2023)
- Street Glide Special (2014–2023)
- Street Glide CVO (2014–2023)
- Road Glide (2015–2023)
- Road Glide Special (2015–2023)
- Road Glide Limited / Ultra (2015–2024)
- Electra Glide (2014–2023)
- Tri Glide Ultra (2009–2025)
- Freewheeler (2015+)
- CVO models with compatible 8" lid/pod kits
Recommended System Matching
- Ideal for 300–600 W rear amplifier channels.
- DSP recommended for high-pass filtering and level control.
- Pairs with CHX, CH and CX front horn speakers.
- Excellent with saddlebag subs or passive radiator systems.
Planning a high-output touring build?
Motorcycle Audio Australia can help configure the perfect amp, DSP and speaker combination.
Shipping
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Return policy
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer’s responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We’ll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you’re unsure about compatibility, reach out before ordering—we’re happy to help.