The complete FLX1000.4 and CHX horn front-stage system for 2014 to 2023 Harley Touring
The Cicada 14FLXCHX-4X2 is a complete high-output front-stage upgrade for 2014 to 2023 Harley-Davidson Touring models. It is built around the FLX1000.4 4-channel amplifier and matched 2 ohm CHX65.2 pro coaxial horn speakers, and includes the power and ground kit, Harley input and output harnesses, branded grilles and amplifier racks for both Road Glide® and Street Glide®. Every part is pre-matched for impedance and power and pre-terminated, so there is no cutting or guesswork. No DSP required.
This is a whole front stage in one box, engineered to work together electrically and mechanically. You execute the install; the system has already been designed around correct gain structure and impedance.
Who This Is For
You want a serious, amplifier-backed front stage on a 2014 to 2023 Touring bike that projects and stays clear at highway speed, without researching individual components or running a DSP. The 14FLXCHX-4X2 delivers that as a matched kit. If you prefer to build around a separate processor, the amplifier at its core is the Cicada FLX1000.4 and the speakers are the CHX65.2, and a DSP412PRO can be added.
What This Is Best For
- Extreme front-stage output. The FLX1000.4 delivers up to 225W RMS per channel into efficient 2 ohm loads, which is what drives horn-loaded speakers to cut through wind, pipes and road noise.
- Horn projection and vocal clarity. The CHX65.2 pro coaxial horn speakers use a carbon matrix cone and are built to project forward, so vocals stay intelligible at real highway speed.
- A matched, no-guesswork install. Speakers, amplifier, wiring, amp racks and grilles all ship pre-matched and pre-terminated, so there is no impedance mismatch or cut-and-join wiring.
- No DSP needed. It is a high-output horn system that performs without a processor, though a DSP can be added later if you want to tune further.
A front-stage kit: plan gain and installation
This system is a high-output front-stage upgrade, so rear speakers and a subwoofer can be added later. Correct gain structure and crossover setup are critical with horn-loaded speakers, so professional installation is strongly recommended to get the projection right without harshness. The kit includes grilles and amplifier racks for both Road Glide® and Street Glide®, so it fits either fairing. The FLX1000.4 is conformal-coated for moisture resistance, not IP-rated, so treat it as weather-resistant rather than waterproof.
The Bottom Line
The Cicada 14FLXCHX-4X2 is the complete, matched way to build a high-output horn front stage on a 2014 to 2023 Harley Touring bike, with the FLX1000.4 amplifier, CHX65.2 horn speakers, wiring, racks and grilles in one box. Add it to cart above, and add a DSP412PRO later if you want to tune the stage further.
Fitment
| Model | Stage | Years |
|---|---|---|
| Street Glide®, Road Glide® and Special, Electra Glide®, Ultra Limited®, Tri Glide® Ultra | Fairing front stage (racks and grilles for RG and SG included) | 2014 to 2023 |
The amplifier and speakers
The FLX1000.4 is a high-output 4-channel motorcycle amplifier with strong headroom into 2 ohm loads, which is the load the CHX speakers present. Matching a strong amp to an efficient 2 ohm horn speaker is what produces projection and control in open air. On the road: the front stage stays clear and loud at highway speed instead of running out of power.
The CHX65.2 pro coaxial horn speakers use a rigid, lightweight carbon matrix cone and a horn-loaded top end. The horn focuses high-frequency energy forward toward you. On the road: vocals and detail reach your ears in an open cockpit rather than scattering into the wind.
In the Box
- FLX1000.4 4-channel amplifier (up to 225W x4 at 2 ohm)
- CHX65.2 6.5 inch pro coaxial horn speakers, carbon matrix cone, 2 ohm (pair)
- HDPG4K 4 AWG fused power and ground kit
- HDFiM Harley front input harness and HDFLXRO FLX rear output harness
- CHDRGG Road Glide and CHDSGG Street Glide branded grilles (pairs)
- 14HDAR-RG Road Glide and 14HDAR-SG Street Glide amplifier mounting racks
System Specifications
| Amplifier | FLX1000.4, up to 225W x4 at 2 ohm (RMS) |
| Front speakers | CHX65.2 6.5 in pro coaxial horn, 2 ohm (pair) |
| Wiring | HDPG4K 4 AWG power and ground, Harley input and FLX output harnesses |
| Mounting | Road Glide and Street Glide amp racks included |
| DSP | Not required (optional) |
| Fitment | Harley Touring, 2014 to 2023 |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer's responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We'll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you're unsure about compatibility, reach out before ordering—we're happy to help.