Cicada Audio CHX525.2 — 5.25" Pro Coaxial Horn Motorcycle Speakers (2Ω, Carbon Matrix Composite)
Cicada Audio CHX525.2 — 5.25" Pro Coaxial Horn Speakers for Harley-Davidson Motorcycle Audio Systems (2Ω, Carbon Matrix Composite)
Built for riders chasing maximum amplifier power and the clearest possible front-stage sound.
The Cicada Audio CHX525.2 is a high-efficiency 5.25-inch Pro Coaxial Horn driver designed specifically for motorcycle audio. Its 2Ω voice coil extracts more real-world wattage from modern motorcycle amplifiers, while the Carbon Matrix Composite™ cone and horn-loaded tweeter deliver razor-sharp clarity and impressive projection at highway speeds.
If you're building a loud, sharp, high-performance Harley audio system — especially on earlier Touring models — the CHX525.2 is one of the most capable 5.25” horn-loaded speakers available.
Key Features
- 2Ω impedance: Draws more power from your amplifier for noticeably higher output.
- Horn-loaded tweeter: Projects vocals and highs forward with authority, cutting through exhaust, wind and road noise.
- Carbon Matrix Composite™ cone: Lightweight, rigid and UV/heat resistant for consistent performance.
- Motorcycle-built durability: Designed to handle vibration, temperature swings and long-distance riding.
- Compact 5.25” format: Perfect for Harley fairings with limited mounting depth.
- High-efficiency design: Delivers impressive volume even with compact Class-D amplifiers.
Specifications
| Cicada Audio CHX525.2 – Technical Specifications | |
|---|---|
| GENERAL | |
| Speaker Size | 5.25" Pro Coaxial Horn |
| Design | Horn-loaded coaxial with Carbon Matrix Composite™ cone |
| Impedance | 2 Ω |
| Power Handling | 150W RMS / 300W MAX |
| AUDIO PERFORMANCE | |
| Sensitivity | 91 dB (1W / 1M) |
| Frequency Response | 90 Hz – 20 kHz (±5 dB) |
| COMPONENTS | |
| Cone Material | Carbon Matrix Composite™ |
| Tweeter | 1.0" aluminium-dome horn tweeter |
| Mid-Bass Voice Coil | 1.5" (38.1 mm) OFC copper |
| Tweeter Voice Coil | 1.0" OFC copper |
| Crossover | External 12 dB, vented, encased crossover |
| Tweeter Attenuation | -3 / -6 dB resistor pack |
| Magnet | Neodymium N35SH |
| Basket | Die-cast aluminium with Vortex Flow Venting™ |
| PHYSICAL | |
| Mounting Depth | 2.75" (69.85 mm) |
| Cut-Out Diameter | 4.66" (118.5 mm) |
| Grilles | Not included |
| WARRANTY | |
| Coverage | 2 years |
| ⚠️ IMPORTANT – Crossover & Setup Requirements (Read Before Installation) | |
|---|---|
|
All horn speakers have mechanical limits. Regardless of power ratings or advertised “MAX” figures, a speaker can only move so far before mechanical failure occurs. Most horn speaker failures are NOT burned voice coils. In real-world motorcycle installs, damage is typically caused by over-excursion — the speaker moving too far because it is crossed over too low. This leads to tinsel leads tearing away from the voice coil or spider. Once this happens, the speaker is permanently damaged. |
|
Required High-Pass Crossover Settings
Lower crossover points WILL cause distortion and speaker damage. |
|
|
Saddlebag & Pod Installations – Critical Note
When using 6×9 or 8-inch Pro Mid-Bass / Horn drivers inside saddlebags, internal air volume is limited. Cicada Audio strongly recommends the following DSP settings:
Never run these speakers full-range. |
|
Amplifier & Wiring Setup Notes
Always high-pass coaxial horn drivers. |
Why It Works So Well on Motorcycles
- 2Ω load = more volume: Pulls maximum wattage from modern Class-D amplifiers.
- Superior clarity at speed: Horn tweeter cuts through wind and exhaust noise effortlessly.
- Strong midbass response: Carbon Matrix Composite™ cone delivers tight, accurate punch.
- Engineered for real riding: Heat, vibration and voltage swings don’t faze it.
Fitment
Designed for Harley-Davidson Touring fairing locations (1998–2013 models).
- Street Glide (1998–2013)
- Street Glide CVO (1998–2013)
- Road Glide (1998–2013)
- Road Glide CVO (2009–2013)
Recommended System Matching
- Pairs extremely well with high-power Cicada CX, DSP and FLX amplifiers.
- Best used as front-stage fairing speakers.
- DSP recommended for improved imaging and smoother frequency response.
- Complements Cicada horn-loaded rears in bigger multi-amp builds.
Chasing maximum output from your Harley fairing?
Motorcycle Audio Australia can help match the CHX525.2 with the ideal amplifier, DSP and wiring for your build.
Shipping
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Return policy
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer’s responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We’ll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you’re unsure about compatibility, reach out before ordering—we’re happy to help.