Cicada Audio HDFRBoM-8 – H-D Bridged Speaker Output Molex® Harness (8′, Stereo / Bridged)

Cicada Audio HDFRBoM-8 – H-D Bridged Speaker Output Molex® Harness (8′, Stereo / Bridged)

$105.00 AUD
SKU: HDFRBoM-8
Skip to product information
Cicada Audio HDFRBoM-8 – H-D Bridged Speaker Output Molex® Harness (8′, Stereo / Bridged)

Cicada Audio HDFRBoM-8 – H-D Bridged Speaker Output Molex® Harness (8′, Stereo / Bridged)

$105.00 AUD
SKU: HDFRBoM-8

Cicada Audio HDFRBoM-8 – H-D Bridged Speaker Output Molex® Harness (8′)

High-power bridged speaker output from fairing to rear-mounted amplifiers.

The Cicada Audio HDFRBoM-8 is a purpose-built Molex speaker output harness designed to connect bridged left and right speaker outputs from a fairing-mounted Cicada Audio amplifier to a second amplifier installed in the saddlebag or tour pack.

This harness is commonly used when running CH5/6 signal output from the front amplifier to a rear amplifier with paralleled inputs, allowing clean, high-power speaker-level signal transfer without cutting or modifying wiring.

With a generous 8′ (2.4m) length, the HDFRBoM-8 is ideal for full-system Harley-Davidson® audio builds where amplification is split between the fairing and rear of the bike.

Key Features

  • Bridged left and right speaker output harness
  • Designed for fairing to saddlebag or tour pack amplifier installs
  • Supports CH5/6 bridged output configurations
  • Molex connectors for secure, vibration-resistant connections
  • 8′ (2.4m) harness length for extended routing
  • Stereo / bridged speaker-level operation
  • Plug-and-play design – no cutting or splicing required

Typical Applications

  • Connecting a fairing-mounted Cicada amplifier to a rear amplifier
  • Running bridged CH5/6 speaker output to saddlebag or tour pack amps
  • High-output multi-amplifier Harley-Davidson audio systems

Fitment

This part is listed for the platforms below. If your bike is not on the list, tell us the model and year and we will check it for you.

Model Years
Electra Glide and Street Glide (batwing) 1998 – 2013
Road Glide 1998 – 2013
Street Glide, Electra Glide and Ultra (batwing) 2014 – 2023
Road Glide 2015 – 2023
Street Glide (batwing) 2024+
Road Glide 2024+
Harley trike (batwing) 2009 – 2013
Tri Glide Ultra (batwing) 2014 – 2025
Road Glide 3 (sharknose trike) 2023 – 2025
Harley trike (batwing) 2026+
Road Glide 3 (sharknose trike) 2026+

Compatibility

  • Cicada Audio amplifiers using Molex speaker output connections On the road: the connections are made to resist vibration, so the link between the two amplifiers stays secure over a long day of riding.
  • Fairing, saddlebag and tour pack amplifier configurations On the road: the harness is long enough to carry bridged speaker output from the fairing amplifier back to a second amp in the bag or tour pack in one unbroken run.

Installation Notes

  • Designed for bridged speaker output use only
  • Not intended for signal-level or RCA connections
  • Ensure amplifier bridging and speaker load impedance are correctly configured
  • Professional installation recommended for rear-mounted amplifier systems

Warranty

Covered by Cicada Audio’s manufacturer warranty.

Specifications

Product Type Bridged speaker output Molex harness
Brand Cicada Audio
Model HDFRBoM-8
Length 8′ (2.4m)
Connectors Molex
Signal Type Stereo / bridged speaker-level
Configuration Bridged left and right speaker output; supports CH5/6 bridged output
Application Fairing-mounted Cicada Audio amplifier to saddlebag or tour pack amplifier
Installation Plug-and-play – no cutting or splicing required
Not Intended For Signal-level or RCA connections
Warranty Covered by Cicada Audio’s manufacturer warranty

Related collections

This part is listed in: All 2014–2023 Touring Audio · Wiring & Harnesses · Cicada Audio

Australia Shipping:

  • Under $500 → $19.95
  • $500–$2,500 → $14.95
  • $2,500 and above → FREE
  • Bulky items → +$25 surcharge (waived once your order reaches $2,500)

Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.

View full Shipping Policy →

Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.

Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.

Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.

Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.

View full Returns & Refunds Policy →

You may also like