Cicada Audio HDPG2KD – Harley-Davidson 2 AWG Heavy-Duty Dual-Amp Power & Ground Kit
$515.00 AUD
SKU: HDPG2KD
2 AWG dual-amplifier power and ground kit. Powers up to three Cicada FLX amplifiers from a single high-current run.
The Cicada Audio HDPG2KD is a heavy-duty 2 AWG dual-amplifier power and ground wiring kit for Harley-Davidson® – 2 AWG and 4 AWG power/ground cables, waterproof fuse holder, MANL 100A/150A/200A fuses, dual power and ground distribution blocks, 18 AWG blue remote turn-on wire, and corrosion-resistant ring terminals. Designed to power up to three Cicada FLX amplifiers.
Running multiple high-current amplifiers from a single battery connection requires more than just heavier cable – it requires distribution hardware that splits power and ground cleanly without introducing resistance at the distribution point. The HDPG2KD provides both: 2 AWG primary cable for the main run from the battery, 4 AWG secondary wiring for the distribution legs, and dual distribution blocks that split power and ground for up to three amplifiers. The fuse selection (100A, 150A, 200A MANL) covers the range from a single high-output amp through a full multi-amp Tour-Pak and saddlebag build.
Who This Is For
Riders running two or three Cicada FLX amplifiers – particularly high-current models like the FLX2000.4, FLX2500.1, or BFA5000.1 – where aggregate current draw is beyond what a single-amp kit can support cleanly. For single-amplifier Tour-Pak builds, the HDPG2KT (2 AWG) is the simpler option. For moderate single-amp builds, the HDPG6K (6 AWG) is sufficient.
What This Is Best For
- Dual and triple amplifier builds – distribution blocks split power and ground cleanly for up to three amplifiers; each amp gets a dedicated, low-resistance connection from the block.
- High-current FLX amplifier systems – 2 AWG primary cable supports the combined current draw of FLX2000.4, FLX2500.1, BFA5000.1, and similar high-demand models without voltage sag under load.
- Complete, ready-to-install kit – everything in one box: primary cable, distribution hardware, fuses in three ratings, remote wire, and terminals. No sourcing hardware separately.
- Flexible fusing – 100A, 150A, and 200A MANL fuses included; select the rating that matches the combined amplifier current draw.
What's in the HDPG2KD
Premium 2 AWG power (red) and ground (black) primary cables for the main battery run, and 4 AWG secondary cables for the distribution legs to each amplifier. The kit includes dual distribution blocks (power and ground), a waterproof MANL fuse holder, MANL 100A, 150A, and 200A fuses, an 18 AWG blue remote turn-on wire, and corrosion-resistant ring terminals. On the road: the waterproof fuse holder and corrosion-resistant terminals suit a bike that lives outdoors and gets ridden in the wet.
Fitment
This part is listed for the platforms below. If your bike is not on the list, tell us the model and year and we will check it for you.
| Model | Years |
|---|---|
| Electra Glide and Street Glide (batwing) | 1998 – 2013 |
| Road Glide | 1998 – 2013 |
| Street Glide, Electra Glide and Ultra (batwing) | 2014 – 2023 |
| Road Glide | 2015 – 2023 |
| Street Glide (batwing) | 2024+ |
| Road Glide | 2024+ |
| Harley trike (batwing) | 2009 – 2013 |
| Tri Glide Ultra (batwing) | 2014 – 2025 |
| Road Glide 3 (sharknose trike) | 2023 – 2025 |
| Harley trike (batwing) | 2026+ |
| Road Glide 3 (sharknose trike) | 2026+ |
Technical Specifications
| Primary Wire Gauge | 2 AWG (power + ground) |
| Distribution Wire Gauge | 4 AWG |
| Distribution Blocks | Dual – power and ground |
| Amplifiers Supported | Up to 3 |
| Fuse Holder | Waterproof MANL |
| Fuses Included | 100A, 150A, 200A MANL |
| Remote Wire | 18 AWG blue |
| Battery Termination | Corrosion-resistant ring terminals |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.