Cicada Audio HDPG2KT – 2 AWG Tour-Pak® Amplifier Wiring Kit
$340.00 AUD
SKU: HDPG2KT
2 AWG power and ground wiring kit for Tour-Pak® amplifier builds. Pre-cut, pre-loomed, high-current ready.
The Cicada Audio HDPG2KT is a 2 AWG power and ground wiring kit designed for Tour-Pak amplifier installations – heavy-duty 2 AWG power and ground cables (pre-cut, pre-loomed), waterproof MANL fuse holder, 60A/80A/100A MANL fuses with extras, 18 AWG blue remote turn-on wire, and corrosion-resistant ring terminals.
The HDPG2KT is built for Tour-Pak builds where the amplifier is mounted in the Tour-Pak luggage – the furthest point from the battery, requiring the lowest-resistance power cable to compensate for the longer run. At 2 AWG, it delivers maximum current capacity with minimal voltage drop across the full cable distance from battery to Tour-Pak amplifier stage. The cables come pre-cut to length and pre-loomed; the fuse selection (MANL 60A, 80A, 100A) covers the range of single and dual-amp Tour-Pak configurations.
Who This Is For
Riders running amplifiers in a Tour-Pak where the longer cable run demands the heaviest-gauge wire in the Cicada wiring kit range to maintain clean power delivery. Also suited to any build running high-current amplifiers where maximum wire capacity is the priority regardless of mounting location. For fairing or saddlebag single-amp builds where the cable run is shorter, the HDPG6K (6 AWG) is typically sufficient.
What This Is Best For
- Tour-Pak amplifier builds – 2 AWG minimises voltage drop over the longer cable run from the battery to an amplifier mounted in the rear Tour-Pak, keeping the amp fed properly under sustained load.
- High-current multi-amp builds – where aggregate amplifier current draw is high and maximum cable capacity is needed regardless of mounting position.
- Clean, ready-to-install format – pre-cut, pre-loomed cables with ring terminals already fitted; no sourcing hardware separately or custom cutting required.
- Flexible fuse selection – MANL 60A, 80A, and 100A fuses included with extras; match the fuse rating to the amplifier's actual current draw.
What's in the HDPG2KT
The kit includes 2 AWG power (red) and ground (black) cable pre-cut to length and pre-loomed in protective braid. The battery end is pre-fitted with corrosion-resistant ring terminals. Also included: a waterproof MANL fuse holder, MANL 60A, 80A, and 100A fuses with extra fuses supplied, and an 18 AWG blue remote turn-on wire for amplifier activation. On the road: the heavy gauge holds voltage steady over the long run to the back of the bike, so the amplifier stays properly fed when you hold it at volume.
Fitment
This part is listed for the platforms below. If your bike is not on the list, tell us the model and year and we will check it for you.
| Model | Years |
|---|---|
| Street Glide, Electra Glide and Ultra (batwing) | 2014 – 2023 |
| Road Glide | 2015 – 2023 |
| Street Glide (batwing) | 2024+ |
| Road Glide | 2024+ |
| Tri Glide Ultra (batwing) | 2014 – 2025 |
| Road Glide 3 (sharknose trike) | 2023 – 2025 |
| Harley trike (batwing) | 2026+ |
| Road Glide 3 (sharknose trike) | 2026+ |
Technical Specifications
| Wire Gauge | 2 AWG |
| Application | Tour-Pak and high-current amplifier installations |
| Cables | Pre-cut, pre-loomed (power + ground) |
| Battery Termination | Corrosion-resistant ring terminals (pre-installed) |
| Remote Wire | 18 AWG blue |
| Fuse Holder | Waterproof MANL |
| Fuses Included | 60A, 80A, 100A MANL (extra fuses included) |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.