HDFiMY - H-D® Input - Molex® - FRONT/Y Adaptor
$65.00 AUD
SKU: HDFiMY
Front Y-adaptor for bridging a Cicada Audio® amplifier from the H-D® factory radio front output. Molex® connectors, plug-and-play – sold as pair for full 4-channel bridged operation.
The Cicada Audio HDFiMY is a front input Y-adaptor for bridging a Cicada Audio amplifier using the H-D factory radio front output. One HDFiMY bridges CH1/2 (LEFT); the second bridges CH3/4 (RIGHT) – sold as a pair for complete 4-channel bridged operation. Plug-and-play, no cutting or splicing required.
Running a Cicada Audio amplifier in bridged mode from the H-D factory radio front output requires the signal to be correctly split and configured across both channel inputs of each amp channel pair. The HDFiMY does that – providing the Y-adaptor configuration needed to bridge CH1/2 to a single LEFT output and CH3/4 to a single RIGHT output from the factory front radio signal. Each HDFiMY handles one pair of channels, so the kit ships as a pair to cover the full 4-channel amp.
Who This Is For
Builders running a Cicada Audio amplifier in bridged mode, driven from the H-D factory radio front output. Requires both units in the pair – one for CH1/2 (LEFT), one for CH3/4 (RIGHT). For a standard (non-bridged) front input harness, see the HDFiM. For the rear bridged Y-adaptor, see the HDRiMY.
What This Is Best For
- Bridged-mode amplifier operation from factory front radio output – provides the Y-adaptor configuration required to bridge CH1/2 (LEFT) and CH3/4 (RIGHT) of a Cicada Audio amplifier from the H-D factory front radio signal.
- Full 4-channel bridging in one kit – sold as a pair, one HDFiMY per channel pair; covers the complete front bridge configuration without separate sourcing.
- Plug-and-play installation – Molex connectors throughout; no cutting or splicing to the factory harness required.
How It Works
The kit is two Y-adaptors, one per channel pair. The first takes the factory radio front output and splits it across the amplifier's CH1 and CH2 inputs so that pair bridges as a single LEFT channel; the second does the same across CH3 and CH4 for RIGHT. On the road: a four-channel amplifier runs bridged from the standard radio, with both channel pairs covered by the one kit.
Molex connectors are used throughout, matching the factory radio side and the Cicada Audio amplifier input, so each adaptor plugs in. On the road: the factory harness stays unmodified, with no cutting or splicing to reverse later.
What's in the HDFiMY
| Quantity | Sold as pair (2 units) |
| Unit 1 | CH1/2 bridge Y-adaptor – LEFT |
| Unit 2 | CH3/4 bridge Y-adaptor – RIGHT |
| Connection | H-D factory radio front output → Cicada Audio amplifier Molex input (bridged configuration) |
| Connectors | Molex |
| Installation | Plug-and-play – no cutting or splicing required |
Fitment
This part is listed for the platforms below. If your bike is not on the list, tell us the model and year and we will check it for you.
| Model | Years |
|---|---|
| Street Glide, Electra Glide and Ultra (batwing) | 2014 – 2023 |
| Road Glide | 2015 – 2023 |
| Tri Glide Ultra (batwing) | 2014 – 2025 |
| Road Glide 3 (sharknose trike) | 2023 – 2025 |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.