HDRiMY - H-D® Input - Molex® - REAR/Y Adaptor
$65.00 AUD
SKU: HDRiMY
Rear Y-adaptor for bridging a Cicada Audio® DSP600.4D or CX600.4D as a second amp from the H-D® factory rear radio output. Molex® connectors, plug-and-play.
The Cicada Audio HDRiMY is a rear input Y-adaptor for bridging a Cicada Audio DSP600.4D or CX600.4D amplifier from the H-D factory rear radio output – provides the bridged signal configuration needed to run the second or bag amplifier in bridged mode using the factory rear channel signal. Plug-and-play, no cutting or splicing required. Note: requires the 4-channel output plug and appropriate output harness to be present on the factory H-D radio.
Running a second Cicada Audio amplifier in bridged mode off the H-D factory rear radio output requires the signal to be correctly configured for bridge operation at the amp's input. The HDRiMY provides that – taking the factory rear radio output and delivering it in the Y-adaptor configuration the DSP600.4D or CX600.4D needs to operate in bridged mode for rear or bag speaker duties.
Who This Is For
Builders running a Cicada Audio DSP600.4D or CX600.4D as a second or bag amplifier in bridged mode, driven from the H-D factory rear radio output. For a standard (non-bridged) rear input harness, see the HDRiM. For the front bridged Y-adaptor, see the HDFiMY.
What This Is Best For
- Bridged-mode operation for a second/bag Cicada amp – provides the rear Y-adaptor configuration required to bridge a Cicada Audio DSP600.4D or CX600.4D from the H-D factory rear radio output.
- Plug-and-play installation – Molex connectors throughout; no cutting or splicing to the factory harness required.
- Multi-amp system integration – enables a dedicated rear/bag amp to run in bridged mode alongside a front fairing amplifier, driven cleanly from the factory rear radio signal.
What's Inside the HDRiMY
The adaptor is a Molex-connectored link with the Y configuration built into it: it takes the factory rear radio output and presents it to the amplifier input in the bridged arrangement a DSP600.4D or CX600.4D needs for rear or bag duties. It plugs in at both ends, with no cutting or splicing. On the road: the factory harness stays uncut, so the wiring behind the panels is the wiring the bike came with.
Because the signal is taken off the rear channel, the bridged amp sits alongside a front amplifier instead of replacing it. On the road: the second amplifier runs the rear speakers while the front amplifier keeps the fairing, so each end of the bike has its own output behind it.
Fitment
This part is listed for the platforms below. If your bike is not on the list, tell us the model and year and we will check it for you.
| Model | Years |
|---|---|
| Street Glide, Electra Glide and Ultra (batwing) | 2014 – 2023 |
| Road Glide | 2015 – 2023 |
| Tri Glide Ultra (batwing) | 2014 – 2025 |
| Road Glide 3 (sharknose trike) | 2023 – 2025 |
Compatibility
| Amplifier Compatibility | Cicada Audio DSP600.4D, CX600.4D |
| Connection | H-D factory radio rear output → Cicada Audio amplifier Molex input (bridged configuration) |
| Connectors | Molex |
| Installation | Plug-and-play – no cutting or splicing required |
| Prerequisite | 4-channel output plug and appropriate output harness must be present on the factory H-D radio |
Specifications
| Product Type | Rear input Y-adaptor |
| Brand | Cicada Audio |
| Model | HDRiMY |
| Signal Source | H-D factory rear radio output |
| Amplifier Compatibility | Cicada Audio DSP600.4D, CX600.4D |
| Amplifier Mode | Bridged |
| Application | Second or bag amplifier for rear or bag speaker duties |
| Connector Type | Molex |
| Installation | Plug-and-play – no cutting or splicing |
| Requires | 4-channel output plug and appropriate output harness present on the factory H-D radio |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.