Rockford Fosgate Power Motorcycle 6"x9" Full Range Bag Lid Speakers
$779.00 AUD
SKU: TMS69
Skip to product information
| Size | 6x9 |
| Impedance | 4Ω |
| Power | 100W RMS |
| Year Range | 1998-2013, 2014-2023, 2024+ |
| Location | Saddlebags |
Weather-ready 6×9 inch speakers built for saddlebag lids
The Rockford Fosgate TMS69 is a full-range coaxial speaker designed for the bag lid speaker locations on motorcycles made for 6×9 inch speakers. It uses a lightweight neodymium dual magnet motor structure, a carbon-fibre reinforced polypropylene cone co-moulded with a Santoprene VAST surround, and an ultra-efficient 25 mm film dome tweeter with an integrated phase plug, all in an Element Ready™ design that is weather and water resistant.
This is a purpose-built bag lid driver from the Rockford Fosgate TMS series, made for riders who are tired of losing their music to the wind. The neodymium motor gives the magnet strength in a fraction of the size and weight of traditional ceramic ferrite magnets, so the lid is not weighed down.
Who This Is For
You ride a bagger with 6×9 inch speaker locations in the saddlebag lids, your music disappears once you are moving, and you want a rear stage that survives Australian sun and rain. If you are refreshing the fairing at the same time, the 6.5 inch Power full-range speaker is the matching front-stage part. To give these speakers the power they deserve, the 2014+ amplifier wiring kit is the install side of the job.
What This Is Best For
- Living outside in the weather. The Element Ready design is weather and water resistant, helped by a Santoprene front isolation spider connecting the tweeter housing to the cone assembly.
- Keeping weight off the bag lid. The ultra-efficient neodymium dual magnet motor structure delivers its motor strength in a fraction of the size and weight of traditional ceramic ferrite magnets.
- Surviving heat and vibration. An ultra-high-temperature glass reinforced polymer frame, a high-power 35 mm voice coil and a poly-cotton spider handle the conditions inside a saddlebag lid.
- A clean, low-profile look. The low-profile coaxial tweeter design, ASA grille and discreet hidden tweeter wire keep the installation tidy.
- Simple wiring. Integrated spade terminals and an integrated 6 dB crossover with a high-power polyester capacitor mean the crossover work is already done inside the speaker.
Check your bag lid opening before ordering
The TMS69 is designed for bag lid speaker locations made for 6×9 inch speakers. Before ordering, confirm that your saddlebag lids have a 6×9 inch speaker location and that you have the depth and clearance behind the lid for a coaxial driver. If you are unsure what your bike is set up for, tell us the model and year and we will check it for you.
Features
- Element Ready design that is weather and water resistant On the road: the speaker sits out in Australian sun and rain the same as the rest of the bike, because the weather and water resistance is designed in.
- Ultra-efficient 25 mm proprietary film dome tweeter with integrated phase plug and ASA grille
- Neodymium tweeter and ultra-efficient neodymium dual magnet motor structure On the road: the magnet strength arrives without the mass of a traditional ceramic ferrite motor, so the saddlebag lid is not carrying the extra weight every time you open it.
- Carbon-fibre reinforced polypropylene cone, co-moulded with a Santoprene VAST surround
- Santoprene front isolation spider between the tweeter housing and cone assembly
- Poly-cotton spider
- High-power 35 mm voice coil
- Ultra-high-temperature glass reinforced polymer frame On the road: the frame is rated for high temperature, which is what a saddlebag lid parked in the Australian summer sun actually asks of it.
- Integrated 6 dB crossover with high-power polyester capacitor
- Low-profile coaxial tweeter design with discreet hidden tweeter wire
- Integrated spade terminals
In the Box
- TMS69 6×9 inch full-range coaxial bag lid speakers
Fitment
| Location | Requirement |
|---|---|
| Motorcycle saddlebag lid | Bag lid speaker location made for 6×9 inch speakers |
| Your model and year | Send them to us and we will confirm the opening before you order |
Specifications
| Model | TMS69 |
| Size | 6×9 in, full-range coaxial |
| Application | Bag lid speaker locations made for 6×9 inch speakers |
| Tweeter | 25 mm film dome, neodymium, integrated phase plug, ASA grille |
| Woofer motor | Ultra-efficient neodymium dual magnet structure |
| Voice coil | 35 mm high power |
| Cone and surround | Carbon-fibre reinforced polypropylene, co-moulded Santoprene VAST surround |
| Spider | Poly-cotton, with Santoprene front isolation spider |
| Frame | Ultra-high-temperature glass reinforced polymer |
| Crossover | Integrated 6 dB with high-power polyester capacitor |
| Terminals | Integrated spade terminals |
| Weather protection | Element Ready, weather and water resistant |
| Warranty | 2 years |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.