A modern receiver and tuned fairing speakers for the 1998 – 2013 Street Glide®
This Rockford Fosgate kit is a 2-speaker, 50 watt audio system built for select 1998 – 2013 Harley-Davidson® Electra Glide® and Street Glide models. It includes the PMX-HD9813 digital media receiver and a pair of TMS6SG 6.5 inch fairing speakers with a Street Glide grille. The built-in amplifier in the source unit drives both speakers, the kit uses the existing factory system for power and speaker wiring, and it bolts to factory attachment points with no drilling or cutting.
This is the clean way to rebuild the front stage on a batwing bike. Receiver and speakers come as one matched, purpose-built system, so you install rather than source and match parts, and the whole thing runs off wiring already in the bike.
Who This Is For
You ride a 1998 – 2013 Street Glide (FLHX) or a 2006 – 2013 Electra Glide Standard (FLHTI), the factory radio is tired, and you want Bluetooth® streaming with fairing speakers that hold up at highway speed without fitting a separate amplifier. When you want more than the built-in amplifier gives, the Street Glide source unit, 2-speaker and amp kit is the next step up, and the Street Glide source unit, 4-speaker and amp kit adds a rear stage as well. If you ride a Road Glide® instead, the Road Glide source unit, 2-speaker kit is the matching part.
What This Is Best For
- A complete front upgrade in one purchase. Receiver and fairing speakers are supplied together and matched, so there is no component research or compatibility guesswork.
- A bolt-in, no-cut install. The kit bolts to factory attachment points, uses direct connect wiring harnesses for the bike, and takes power and speaker wiring from the existing factory system.
- Clarity at highway speed. The 6.5 inch fairing speakers are frequency-response tuned to overcome wind, exhaust and road noise up to 75 mph (120 km/h).
- Modern source and control. The PMX-HD9813 adds Bluetooth wireless streaming, USB and AUX inputs, Pandora® and an AM/FM digital tuner, and radio integration supports front and rear fader control.
- Two years of cover. The kit carries a 2 year warranty.
Check your factory radio and options before ordering
The replacement radio is not compatible with factory amplified systems, CB, intercom, rear volume controls, rear speakers on 1998 – 2005 Ultra models, or factory equipped satellite radio systems. Fitment covers the select Street Glide and Electra Glide Standard models listed in the fitment table, so confirm your model and year before ordering. The receiver is SiriusXM® Ready, though SiriusXM is not available in Australia. If you are unsure what your bike has, tell us the model and year and we will check it for you.
What is in the kit
The PMX-HD9813 digital media receiver is a direct replacement for 1998 – 2013 Harley-Davidson models, and it is both source and amplification: Bluetooth wireless streaming, USB and AUX inputs, Pandora and an AM/FM digital tuner that is SiriusXM Ready, with radio integration supporting front and rear fader control. Its built-in amplifier powers the speakers in this kit. The TMS6SG fairing speakers are 6.5 inch two-way Element Ready™ drivers with a phase-aligned 25 mm tweeter and a Street Glide grille, frequency-response tuned to overcome wind, exhaust and road noise up to 75 mph (120 km/h). Direct connect wiring harnesses tie the kit into the existing factory system for power and speaker wiring, so the install bolts to factory attachment points. On the road: the fairing pair is tuned to hold its clarity against wind, exhaust and road noise up to 75 mph (120 km/h), so you are not reaching for the volume every time the traffic opens up.
In the Box
- PMX-HD9813 digital media receiver for 1998 – 2013 Harley-Davidson models On the road: the amplification sits inside the receiver itself, so the upgrade does not need a separate amplifier mounted somewhere on the bike.
- TMS6SG 6.5 inch two-way Element Ready fairing speakers with phase-aligned 25 mm tweeter and Street Glide grille (pair)
- Direct connect wiring harnesses for Harley-Davidson models
Fitment
| Model | Requirement | Years |
|---|---|---|
| Street Glide (FLHX) | No factory amplified system, CB, intercom, rear volume controls or factory satellite radio | 1998 – 2013 |
| Electra Glide Standard (FLHTI) | As above | 2006 – 2013 |
Specifications
| System | 2-speaker, 50 watt |
| Receiver | PMX-HD9813 – Bluetooth wireless streaming, USB, AUX, Pandora, AM/FM digital tuner (SiriusXM Ready, not available in Australia) |
| Amplification | Built-in amplifier in the source unit |
| Fairing speakers | TMS6SG – 6.5 in two-way Element Ready, phase-aligned 25 mm tweeter, Street Glide grille |
| Speaker tuning | Frequency-response tuned to overcome wind, exhaust and road noise up to 75 mph (120 km/h) |
| Wiring | Uses existing factory system for power and speaker wiring, direct connect harnesses |
| Install | Bolts to factory attachment points, no drilling or cutting |
| Fader control | Front and rear fader supported |
| Warranty | 2 years |
| Fitment | 1998 – 2013 Street Glide (FLHX), 2006 – 2013 Electra Glide Standard (FLHTI) |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.