Which speakers fit a 1998–2013 Road Glide?
The classic Road Glide fairing has limited mounting depth, so deep baskets and large magnets can interfere with the inner fairing or surrounding hardware, and a low-profile driver is sometimes needed. Because the front position sits inside the inner fairing rather than on your direct axis, driver sensitivity often has as much influence on perceived loudness as amplifier power. Your amplifier should determine whether you choose 2Ω or 4Ω, which sets the output the speaker can deliver.
FAQ
What size speakers fit the classic 1998 to 2013 Road Glide?
The Sharknose inner fairing uses a 5.25 inch front speaker on the classic 1998 to 2013 Road Glide®, and compatible aftermarket or cut-in saddlebag lids use a 5x7 oval. Check the fitment information on each product for depth clearance.
Why is speaker depth a constraint on the Sharknose fairing?
The classic Road Glide fairing has limited mounting depth, so a deep-magnet driver can interfere with the inner fairing or surrounding hardware. Choose a low-profile speaker, or use a spacer where the listing recommends one, so the driver seats correctly.
Is this collection for the 2015 and newer Road Glide?
No. The Sharknose Road Glide was discontinued after 2013 and returned with a redesigned fairing for 2015 whose speaker housing accepts purpose-built 6.5-inch upgrades. For the newer bike, see speakers for the 2015 to 2023 Road Glide.
Do these speakers need an amplifier?
They perform best on a dedicated external amplifier. On a correctly configured amp, a higher-sensitivity driver produces more usable output from the same power. See the classic Road Glide amplifiers.