The correct-gauge fairing amp power harness with a service disconnect for 2014+ Harley Touring
This 8-gauge premium power harness delivers clean, fused power to a fairing-mounted amplifier on a 2014 and newer Harley-Davidson Touring bike. Engineered by American Hard Bag, it uses 8 AWG cable, OEM-grade connectors, an inline fuse and an integrated service disconnect, so the amplifier gets the current it needs and the fairing can still be removed without disturbing the wiring. No cutting or splicing of factory wiring.
This is a power feed, not a signal harness. It solves the two things a fairing amp install gets wrong: the wrong wire gauge, and no clean way to remove the fairing afterward.
Who This Is For
You are mounting an amplifier in the fairing of a 2014+ Touring bike and you want the power feed done to spec, with a disconnect so future fairing removal is a one-plug job. It suits any fairing amp, from a Hertz SP4.500 to a SounDigital EVO PS 1200.4. For a saddlebag-mounted amp, the saddlebag amplifier harness is the matching run.
What This Is Best For
- Feeding a fairing-mounted amplifier with 8 AWG cable, which is the gauge a modern Class-D amp needs so it is not starved of current under load.
- Serviceable fairing removal. The integrated quick disconnect lets you pull the fairing without unwiring the amp, which matters because you will be in there again.
- A safe, fused feed. The inline fuse protects both the amplifier and the bike's electrical system at the source.
- A vibration-proof connection. OEM-grade connectors resist the heat, moisture and constant vibration of a fairing, so power stays solid rather than going intermittent.
The Bottom Line
This 8-gauge harness is the correct, serviceable way to power a fairing-mounted amplifier on a 2014+ Harley Touring bike, with the right gauge, a fuse and a disconnect built in. Add it to cart above. For a full dedicated power and ground run on a bigger build, step up to a Cicada HDPG4K 4 AWG kit.
Fitment
| Model | Application | Years |
|---|---|---|
| Street Glide®, Road Glide®, Ultra, Electra Glide®, CVO | Fairing-mounted amplifier power feed | 2014 and newer |
Why gauge and a disconnect matter
An amplifier can only deliver what its power feed allows. 8 AWG cable carries the current a modern high-output amp draws without voltage drop, where undersized wire starves it and causes clipping and shutdowns. On the road: the amp holds clean output at volume instead of protection-cycling on a hot run.
The integrated service disconnect is the practical touch. A fairing comes off many times over a build's life, and a disconnect turns that into unplugging one connector rather than unwiring the amplifier. In practice: fairing-off jobs take minutes and the power wiring is never disturbed.
Technical Detail
| Cable gauge | 8 AWG |
| Type | Power harness with service disconnect |
| Connection | Battery to fairing-mounted amplifier |
| Protection | Inline fuse (model dependent) |
| Fitment | Harley Touring, 2014 and newer |
In the Box
- 8-gauge premium power harness
- Integrated service disconnect assembly
- Inline fuse (model dependent)
- Zip ties and install accessories
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer's responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We'll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you're unsure about compatibility, reach out before ordering—we're happy to help.