Rockford Fosgate 2014+ Road Glide® & Street Glide® 4-Speaker & Amp Kit
$3,499.00 AUD
SKU: HD14RGSG-STAGE3
Four amplified speakers for the 2014 and newer Road Glide® and Street Glide®
This Rockford Fosgate kit is a 4-speaker, 400-watt audio system purpose built for select 2014+ Harley-Davidson® Road Glide and Street Glide models. It includes a pair of TMS65 6.5 inch fairing speakers, a pair of TMS69BL14 6×9 inch saddlebag lid speakers, a TM400X4ad Power Marine 400 watt Class-AD 4-channel amplifier and the RFK-HD14 wiring kit. The factory Harley-Davidson radio must be flashed to use this kit.
This is the front and rear stage for a bike that keeps its factory radio. Two amplifier channels run the fairing speakers and two run the bag lid speakers, the kit bolts to factory attachment points, and no drilling or cutting is required.
Who This Is For
You ride a 2014 or newer Street Glide or a 2015 or newer Road Glide, you have hard ABS plastic saddlebag lids, and you want the full four-speaker system in one purchase while keeping the factory head unit. If you want to start at the fairing and leave the bags for later, the two-speaker and amplifier kit covers the fairing pair. The 6.5 inch Power fairing speaker and the RFK-HD14 wiring kit are also sold separately if you are building up in stages.
What This Is Best For
- Four amplified speakers in one purchase. Fairing speakers, bag lid speakers, amplifier and wiring kit are matched to each other, so there is no component guesswork.
- Keeping the factory radio. The system works from the factory head unit once it has been flashed, with the T-harness integrating into the electrical system for front and rear fading capability.
- Volume that holds up at highway speed. The fairing and saddlebag speakers are frequency-response tuned to overcome wind, exhaust and road noise up to 75 mph (120 km/h).
- A bolt-in install with no cutting. Direct connect wiring harnesses for Harley-Davidson models, factory attachment points, and an install kit with an external heat-sink, mounting brackets, speaker and power wiring and all necessary hardware.
- Room to add processing later. The T-harness has a loop-thru for an optional DSR1 digital signal processor, sold separately.
Your radio has to be flashed, and your lids have to be ABS
The factory Harley-Davidson radio must be flashed to use this kit, and front and rear fader control requires the "Rockford Fosgate 2014+ All Bikes" flash. The saddlebag kit fits ABS plastic lids, does not fit fibreglass lids, and is not compatible with the H-D Power Lock for Touring Luggage. If you are not sure whether your radio has been flashed or what your bag lids are made of, tell us the model and year and we will check it for you.
What is in the kit
The TMS65 fairing speakers are 6.5 inch two-way Element Ready™ drivers with an integrated phase-aligned 25 mm tweeter. The TMS69BL14 speakers are a 6×9 inch Element Ready retrofit kit for factory hard-shell bags in non-fibreglass models. The TM400X4ad amplifier is a Power Marine 400 watt Class-AD 4-channel unit, running two channels to the fairing and two to the bag lids. The RFK-HD14 wiring kit is the 2014+ Road Glide and Street Glide amplifier wiring kit, with an external heat-sink, mounting brackets, speaker and power wiring and all necessary hardware, plus the T-harness that gives front and rear fading and a loop-thru for a DSR1. On the road: you keep the factory head unit and the way you already use it, with front and rear fading still handled by the radio once it is flashed.
In the Box
- TMS65 6.5 inch two-way Element Ready fairing speakers (pair)
- TMS69BL14 6×9 inch Element Ready saddlebag lid retrofit kit (pair) On the road: the bag lid pair is tuned for wind, exhaust and road noise up to 75 mph (120 km/h), so the rear stage still carries on an open highway run.
- TM400X4ad Power Marine 400 watt Class-AD 4-channel amplifier
- RFK-HD14 amplifier wiring kit with external heat-sink, mounting brackets, speaker and power wiring, T-harness and hardware
Fitment
| Model | Requirement | Years |
|---|---|---|
| Street Glide (FLHX) | Factory radio flash required. ABS plastic bag lids. | 2014 – current |
| Street Glide Special (FLHXS) | As above | 2014 – current |
| Street Glide ST (FLHXST) | As above | 2022 – current |
| Road Glide (FLTRX) | As above | 2015 – current |
| Road Glide Special (FLTRXS) | As above | 2015 – current |
| Road Glide ST (FLTRXST) | As above | 2022 – current |
| Electra Glide® Revival (FLH) | As above | 2021 |
Specifications
| System | 4-speaker, 400 watt |
| Amplifier | TM400X4ad Power Marine – 400 watt, 4-channel, Class-AD |
| Fairing speakers | TMS65 – 6.5 in two-way Element Ready, integrated 25 mm phase-aligned tweeter |
| Saddlebag lid speakers | TMS69BL14 – 6×9 in Element Ready, ABS hard-shell lids, not fibreglass |
| Wiring | RFK-HD14 kit with heat-sink, brackets, wiring and T-harness |
| Signal processing | T-harness loop-thru for optional DSR1, sold separately |
| Radio | Factory radio flash required |
| Fader control | Front and rear fader with the "Rockford Fosgate 2014+ All Bikes" flash |
| Install | Bolts to factory attachment points, no drilling or cutting |
| Warranty | 2 years |
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- $2,500 and above → FREE
- Bulky items → +$25 surcharge (waived once your order reaches $2,500)
Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.
Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.
Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.
Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.
Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.