Rockford Fosgate 2014+ Road Glide® Ultra & Electra Glide® Ultra Classic® 4-Speaker & Amp Kit

Rockford Fosgate 2014+ Road Glide® Ultra & Electra Glide® Ultra Classic® 4-Speaker & Amp Kit

$3,169.00 AUD
SKU: HD14U-STAGE2
Skip to product information
Rockford Fosgate 2014+ Road Glide® Ultra & Electra Glide® Ultra Classic® 4-Speaker & Amp Kit

Rockford Fosgate 2014+ Road Glide® Ultra & Electra Glide® Ultra Classic® 4-Speaker & Amp Kit

$3,169.00 AUD
SKU: HD14U-STAGE2

Amplified fairing and Tour-Pak® sound for the 2014 and newer Ultra

This Rockford Fosgate kit is a 4-speaker, 400-watt audio system purpose built for select 2014+ Harley-Davidson® Road Glide® Ultra and Electra Glide® Ultra Classic® models. It includes two pairs of TMS65 6.5 inch speakers, one for the fairing and one for the Tour-Pak, a TM400X4ad Power Marine 400 watt Class-AD 4-channel amplifier and the RFK-HD14 wiring kit. The factory Harley-Davidson radio must be flashed to use this kit.

This is the front and rear stage for a touring bike that keeps its factory head unit. Two amplifier channels run the fairing and two run the rear Tour-Pak, and the kit bolts to factory attachment points with no drilling or cutting.

Who This Is For

You ride a 2014 or newer Ultra, Tri Glide® or CVO™ touring model with a Tour-Pak, the factory speakers have gone flat, and you want the passenger to hear the same system the rider does. If your bike is a Road Glide or Street Glide® without a Tour-Pak, the Road Glide and Street Glide four-speaker and amplifier kit is the matching part. The 6.5 inch Power speaker and the RFK-HD14 wiring kit are also sold separately.

What This Is Best For

  • Front and rear sound the passenger can hear. Two channels drive the 6.5 inch fairing pair and two drive the 6.5 inch Tour-Pak pair, so the rear seat gets its own amplified speakers.
  • Keeping the factory radio. The system runs from the flashed factory head unit, with the T-harness integrating into the electrical system for front and rear fading capability.
  • Volume that holds up at highway speed. Both speaker pairs are frequency-response tuned to overcome wind, exhaust and road noise up to 75 mph (120 km/h).
  • A bolt-in install with no cutting. Direct connect wiring harnesses for Harley-Davidson models, factory attachment points, and an install kit with heat-sink, brackets, wiring and hardware.
  • Room to grow. Y-adaptors in the install kit support expansion of lower fairing, saddlebag or Tour-Pak speakers, and the T-harness has a loop-thru for an optional DSR1 processor, sold separately.

Your radio has to be flashed first

The factory Harley-Davidson radio must be flashed to use this kit, and front and rear fader control requires the "Rockford Fosgate 2014+ All Bikes" flash. Check your model against the fitment table below, as the listed years differ between the Ultra, Tri Glide and CVO variants. If you are not sure whether your radio has been flashed, tell us the model and year and we will check it for you.

What is in the kit

The TMS65 speakers are 6.5 inch two-way Element Ready™ drivers with an integrated phase-aligned 25 mm tweeter, supplied as a fairing pair and a Tour-Pak pair. The TM400X4ad amplifier is a Power Marine 400 watt Class-AD 4-channel unit, running two channels forward and two to the rear. The RFK-HD14 wiring kit is the 2014+ Road Glide and Street Glide amplifier wiring kit, with an external heat-sink, mounting brackets, speaker and power wiring, Y-adaptors and all necessary hardware, plus the T-harness that gives front and rear fading and a loop-thru for a DSR1. On the road: two channels go forward and two go to the Tour-Pak, so the passenger behind you gets an amplified pair of their own rather than what drifts back from the fairing.

In the Box

  • TMS65 6.5 inch two-way Element Ready fairing speakers (pair)
  • TMS65 6.5 inch two-way Element Ready Tour-Pak speakers (pair)
  • TM400X4ad Power Marine 400 watt Class-AD 4-channel amplifier
  • RFK-HD14 amplifier wiring kit with external heat-sink, mounting brackets, speaker and power wiring, Y-adaptors, T-harness and hardware On the road: the Y-adaptors leave room for lower fairing, saddlebag or Tour-Pak speakers later without redoing the wiring you have just run.

Fitment

Model Requirement Years
Electra Glide Ultra Classic (FLHTCU) Factory radio flash required 2014 – 2020
Electra Glide Ultra Limited (FLHTK) As above 2014 – 2017
Ultra Limited (FLHTK) As above 2018 – current
Ultra Limited Shrine Edition (FLHTK) As above 2021 – current
Electra Glide Ultra Limited Low (FLHTKL) As above 2017 – 2020
Road Glide Ultra (FLTRUSE) As above 2015 – 2020
Road Glide Limited (FLTRKSE) As above 2021 – current
Tri Glide Ultra Classic (FLHTCUTG) As above 2015 – current
Tri Glide Ultra (FLHTCUTG) As above 2021 – current
CVO Limited (FLHTKSE) As above 2014 – 2021
CVO Ultra Limited (FLHTKSE) As above 2016 – 2020
CVO Ultra Limited Electra Glide (FLHTKSE) As above 2014 – 2020
CVO Road Glide Ultra (FLTRUSE) As above 2015 – 2020
CVO Tri Glide Ultra (FLHTCUTGSE) As above 2022 – current

Specifications

System 4-speaker, 400 watt
Amplifier TM400X4ad Power Marine – 400 watt, 4-channel, Class-AD
Speakers TMS65 – 6.5 in two-way Element Ready, integrated 25 mm phase-aligned tweeter
Wiring RFK-HD14 kit with heat-sink, brackets, wiring, Y-adaptors and T-harness
Signal processing T-harness loop-thru for optional DSR1, sold separately
Radio Factory radio flash required
Fader control Front and rear fader with the "Rockford Fosgate 2014+ All Bikes" flash
Install Bolts to factory attachment points, no drilling or cutting
Warranty 2 years

Australia Shipping:

  • Under $500 → $19.95
  • $500–$2,500 → $14.95
  • $2,500 and above → FREE
  • Bulky items → +$25 surcharge (waived once your order reaches $2,500)

Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.

View full Shipping Policy →

Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.

Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.

Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.

Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.

View full Returns & Refunds Policy →

You may also like