Cicada Audio WX900.4 – Waterproof 4-Channel Amplifier (225W x4 @ 2Ω)

Cicada Audio WX900.4 – Waterproof 4-Channel Amplifier (225W x4 @ 2Ω)

$1,365.00 AUD
SKU: WX900.4
Skip to product information
Cicada Audio WX900.4 – Waterproof 4-Channel Amplifier (225W x4 @ 2Ω)

Cicada Audio WX900.4 – Waterproof 4-Channel Amplifier (225W x4 @ 2Ω)

$1,365.00 AUD
SKU: WX900.4
Channels4 Channel
Power4x225W RMS
Year Range1998-2013, 2014-2023, 2024+, Trike 2009-2013, Trike 2014-2025, Trike 2026+

Cicada Audio WX900.4 – Compact 900W IPX6 Amplifier for Harley-Davidson Touring

Big power doesn't have to mean a big amplifier. The Cicada Audio WX900.4 delivers 225W × 4 RMS at 2Ω, 150W × 4 RMS at 4Ω, or 450W × 2 bridged at 4Ω, from a compact Class-D chassis designed for the tight spaces inside Harley-Davidson Touring fairings. Its IPX6-rated enclosure, conformal-coated circuit board and factory-moulded wiring leads provide added protection against rain, road spray and wash water. With a suitable mounting rack, two WX900.4 amplifiers can be accommodated in compatible Street Glide fairings without cutting the fairing.

Unlike conventional amplifiers with exposed power and speaker terminals, the WX900.4 uses factory-moulded, over-braided leads and sealed strain reliefs at the chassis. That makes it an attractive choice for riders who use their bikes in all weather, as well as installers building powerful systems where every millimetre of fairing space matters. Mounting brackets are included; Cicada amplifier racks are sold separately.

Who This Is For

The WX900.4 is for Harley-Davidson riders who want serious four-channel output without filling the fairing with oversized amplifiers. It suits high-output front and rear speaker upgrades, compact dual-amplifier builds and installations where moisture protection is particularly important. Its moulded leads also appeal to installers who prefer a consistent connection arrangement without exposed terminals at the amplifier body.

Need more output per channel and have the space for a larger amplifier? Consider the FLX1400.4. Need built-in DSP? Look at the WX1200.4PRO. For a dedicated subwoofer or mid-bass stage, the WX1000.1 is the matching weather-resistant mono option.

What This Is Best For

  • Strong four-channel systems – 225W RMS per channel at 2Ω gives compatible front and rear speakers substantial headroom, including combinations using CXX65.2 or CX65.2 up front and CXX69.2 or CX69.2 at the rear. Match crossover settings and output to the actual speakers.
  • Space-efficient dual-amplifier builds – compatible Street Glide installations can accommodate two WX900.4 amplifiers side by side on a suitable rack, potentially providing eight amplified channels and a combined rated 1,800W RMS at 2Ω without cutting the fairing. Actual output depends on load, electrical supply and operating conditions.
  • Weather-exposed mounting locations – an IPX6-rated enclosure, conformal-coated electronics and moulded lead exits help protect against heavy rain, road spray and water jets. IPX6 does not mean the amplifier can be submerged or pressure-washed at close range.
  • Bridged two-channel applications – bridge the four channels into two 4Ω loads for a rated 450W × 2. Do not bridge into 2Ω. Check speaker RMS ratings and the full-system configuration first.
  • Flexible factory or aftermarket integration – Micro DIN inputs support compatible high-level and RCA-level input harnesses. Select REM, DC-offset or VOX turn-on to suit the source equipment, and use the 2/4-channel switch when feeding all channels from a stereo source.

WX900.4 or FLX1000.4 – Which One Should You Choose?

Both offer substantial four-channel power, but they suit different installations. Choose the WX900.4 when a compact footprint, IPX6 water resistance and factory-moulded connections are priorities, particularly for tight or dual-amplifier fairing installs. Choose the FLX1000.4 when you have a sheltered mounting location, prefer conventional busbar connections and want its higher 2Ω output rating of 254W × 4 (and 530W × 2 bridged). Neither amplifier has built-in DSP. For time alignment, detailed EQ and signal routing, add a DSP412PRO or consider the WX1200.4PRO.

The Bottom Line

The WX900.4 brings together three things that matter on a Harley: 900W RMS of rated four-channel power at 2Ω, an exceptionally compact chassis and IPX6 weather resistance. It is particularly appealing when you need to fit more amplification into the fairing without cutting or giving up space unnecessarily. Unsure which rack, speakers or interface your bike needs? Tell our System Builder your model and year and we'll help put the complete system together.

Fitment

The WX900.4 is a universal amplifier, not a plug-and-play bike-specific kit. Installation depends on the available space, mounting rack, existing electronics and audio interface. The model ranges below are potential applications, not a guarantee of identical mounting positions across every year.

Model Typical Location Applicable Model Years
Street Glide®, Electra Glide®, Ultra Limited and compatible CVO™ batwing models Batwing fairing; dual-amp arrangements possible on compatible models 1998–2026, subject to mounting and equipment
Road Glide®, Road Glide® Special, Road Glide® Limited and compatible CVO™ Road Glide® models Sharknose fairing; mounting above the headlight and/or below the radio on selected models 1998–2013 and 2015–2026, subject to mounting and equipment
Tri Glide® Ultra, Street Glide® 3 Limited and compatible CVO™ trikes Fairing, where clearance permits 2009–2026, model dependent
Road Glide® 3 Sharknose fairing, where clearance permits 2023–2026, model dependent

Contact Motorcycle Audio Australia if you need to confirm a rack, amplifier orientation or clearance around existing modules.

Power Output – What the Numbers Mean

Rated at 14.4V, the WX900.4 produces 225W × 4 RMS into 2Ω – the 900W total that gives the amplifier its name. That is enough power for demanding four-speaker systems when paired with suitable speakers and a correctly configured crossover. Independent amplifier-bench testing has reported more than 225W per channel at 2Ω, but those measurements are test results, not a guaranteed continuous output for every installation.

In bridged mode, the WX900.4 is rated at 450W × 2 into 4Ω. Each channel of a bridged pair effectively sees half the attached speaker's impedance, which is why the minimum rated bridged load is 4Ω. Do not bridge the WX900.4 into 2Ω.

At 4Ω stereo, the WX900.4 is rated at 150W × 4 RMS. This makes it suitable for four-channel systems using 4Ω speakers where the amplifier’s compact size and weather-resistant construction are priorities.

Why IPX6 Matters

IPX6 is a water-ingress rating under IEC 60529. It means the enclosure is designed to withstand powerful water jets from different directions – valuable protection for a motorcycle that sees heavy rain, road spray and regular cleaning. It is not a submersion rating, and it does not mean an installed amplifier, its external connectors or its wiring joins are immune to every water-related problem. Avoid directing a pressure washer at close range onto the amp or connectors.

Protection comes from the complete design: a conformal coating provides additional moisture resistance for the circuit board; an extruded aluminium body encloses the electronics and dissipates heat; and factory-moulded, over-braided cables pass through supported strain reliefs rather than exposed terminals on the amplifier.

Factory-Moulded Connections

The WX900.4 uses 305mm (12-inch) moulded 8 AWG power and ground leads and 152mm (6-inch) moulded 16 AWG speaker leads terminating in a female Molex® connector. These protected lead exits help reduce the exposure of the amplifier's internal connections to moisture and vibration. External harness joins still need to be installed and protected correctly.

Signal enters through Micro DIN connections, using compatible RCA or Harley-Davidson custom-terminated input harnesses. The amp can accept appropriately matched high-level speaker signals or low-level RCA signals, allowing integration with factory head units, aftermarket radios and external processors. Check harness compatibility and source signal levels when planning the installation.

Heat, Efficiency and Protection

An IR-based Class-D design and an extruded aluminium heatsink enclosure help the WX900.4 deliver substantial output from a small chassis. Cicada lists total efficiency at 80% under its stated specification conditions. The amplifier still generates heat, so even a sealed unit needs secure mounting and adequate clearance around the chassis.

Cicada's ICAD protection circuitry is designed to protect against overload conditions. Status and clipping LEDs assist with setup and fault-finding, but correct gain setting, speaker loading and wiring remain essential.

Tuning and Signal Control

Selectable LPF, Full Range and HPF crossovers operate from 30Hz to 300Hz with a 12dB-per-octave slope. This allows front speakers to be high-passed, a suitable mid-bass channel pair to be low-passed, or a full-range signal to be passed through when an external DSP is handling the processing. Set the actual frequencies and slopes according to the speaker system, not just the amplifier's available adjustment range.

The 2/4-channel input switch allows one stereo source to feed all four channels. Input sensitivity spans 12V to 0.2V, while turn-on options include REM, DC offset and VOX signal sensing. For more advanced time alignment, EQ, crossover control and system routing, add an external DSP.

Power Supply and Wiring

The WX900.4 operates from 9V to 16V. Cicada lists approximately 60A current draw under music conditions and 110A maximum, with an 80A recommended music-rated fuse. These figures represent different operating conditions and must not be treated as simultaneous continuous ratings. Use correctly sized oxygen-free copper power and ground wiring, protect the positive supply with a suitable fuse close to the battery, and verify the installation against the current Cicada wiring instructions.

For a multi-amplifier build, account for the combined current demand, cable lengths, fuse protection, battery condition and available charging capacity. A compact amplifier still places a meaningful electrical load on a motorcycle.

System Integration

The WX900.4 has no onboard DSP. Where time alignment, detailed equalisation or advanced routing is required, install a DSP412PRO upstream, or consider the WX1200.4PRO.

On 2023.5 CVO™ and 2024+ Touring motorcycles with Skyline OS and factory A2B audio, integration typically requires a compatible interface such as the NAV-TV ZEN-H or ZEN-H PRO. The correct interface depends on the bike's factory configuration and how the system is being upgraded.

Mounting and Fairing Space

At just 146 × 130 × 52mm including mounting brackets, the WX900.4 offers useful flexibility for fairing installations. Its chassis is only slightly larger than an FLX700.4 and smaller than an FLX1000.4, making it worth considering when two amplifiers must share a limited mounting area.

2014–2023 Street Glide: On compatible batwing fairing configurations, two WX900.4 amplifiers can fit side by side on a suitable Cicada rack without cutting the fairing. The compact chassis also makes it a potential upgrade from smaller amplifiers where rack and wiring clearance permit.

2015–2023 Road Glide: Depending on the rack, head unit and existing equipment, positions above the headlight and beneath the radio can support compact amplifier layouts without fairing cutting.

2024+ Touring: Where the factory amplifier is removed, its original location may be used for aftermarket amplification alongside the required interface. Check the specific model's available space and A2B integration requirements first.

The supplied mounting brackets support multiple orientations, and compatible Cicada amplifier racks are sold separately. Dual-amplifier layouts and available DSP space must be verified for the particular bike rather than assumed to fit every fairing.

Technical Specifications

Channels 4 (bridgeable to 2)
Amplifier Class Class D (IR-based chipset)
Power Output – 2Ω Stereo @ 14.4V 225W × 4 RMS
Power Output – 4Ω Stereo @ 14.4V 150W × 4 RMS
Power Output – 4Ω Bridged @ 14.4V 450W × 2 RMS
Total Rated Output 900W RMS (4 × 225W at 2Ω)
Frequency Response 20Hz – 20kHz (±3dB)
THD + N 0.1% at 2Ω per channel (10% rated power)
Signal-to-Noise Ratio 91dB (A-weighted)
Damping Factor 200
Total Efficiency 80% (manufacturer specification)
Crossover Modes LPF / Full Range / HPF
Crossover Frequency Range 30Hz – 300Hz
Crossover Slope 12dB per octave
Input Sensitivity 12V – 0.2V
Input Switch 2 / 4 channel
Inputs Micro DIN; compatible RCA and H-D custom-terminated harnesses; high-level or low-level signals
Turn-On Modes REM / DC offset / VOX
Operating Voltage 9V – 16V
Current Draw (Music) 60A (manufacturer specification)
Current Draw (Maximum) 110A (manufacturer specification)
Recommended Fuse 80A (manufacturer's music-rated recommendation)
Power and Ground Leads 305mm (12-inch) moulded, over-braided 8 AWG
Speaker Leads 152mm (6-inch) moulded, over-braided 16 AWG; female Molex® connector
Weather Rating IPX6
Circuit Board Conformal coated
Protection ICAD overload protection; clipping and status LEDs
Chassis Extruded aluminium heatsink enclosure
Dimensions – With Mounting Brackets 146 × 130 × 52mm (5.7 × 5.1 × 2.1 inches)
Dimensions – Chassis Only Approximately 119 × 130 × 52mm (4.7 × 5.1 × 2.1 inches; metric figure inferred from manufacturer's imperial dimensions)
Warranty 3 years

In the Box

  • Cicada Audio WX900.4 amplifier with factory-moulded power, ground and speaker leads
  • Mounting brackets

Australia Shipping:

  • Under $500 → $19.95
  • $500–$2,500 → $14.95
  • $2,500 and above → FREE
  • Bulky items → +$25 surcharge (waived once your order reaches $2,500)

Fast dispatch from Brisbane. In-stock orders placed before 1pm AEST usually ship the same business day.

View full Shipping Policy →

Change of mind: Request a return within 30 days of delivery. The product must be unused, unopened and in its original sealed packaging, valued at $50 or more, and you'll need an RMA number from us before sending anything. Return freight is yours, and a restocking fee of up to 15% may apply – we'll confirm any fee before the return is accepted.

Not returnable for change of mind: opened, installed or test-fitted items, special-order and custom products, custom harnesses, completed tuning, gift cards and items under $50.

Fitment: If we confirmed fitment in writing based on accurate bike details and it doesn't fit, we'll put it right and cover reasonable freight. Not sure? Ask us before you order – we're happy to help.

Faulty, damaged or wrong item: Contact us first with your order number. Faults follow our RMA and warranty process, and none of this affects your rights under the Australian Consumer Law.

View full Returns & Refunds Policy →

You may also like