Cicada Audio CMB69.4 + 24CHDLID — 6×9″ Mid-Bass Saddlebag Lid Bundle (4Ω) for 2024+ H-D® Touring
Sale price
$940.00 AUD
Regular price $1,590.00 AUD
SKU: CMB69.4+24CHDLID
Skip to product information
Cicada Audio CMB69.4 + 24CHDLID — 6×9″ Mid-Bass Saddlebag Lid Bundle (4Ω) for 2024+ H-D® Touring
Sale price
$940.00 AUD
Regular price $1,590.00 AUD
SKU: CMB69.4+24CHDLID
| Size | 6x9 · Mid-bass |
| Impedance | 4 Ohm |
| Power | 150W RMS |
| Year Range | 2024+ |
| Location | Saddlebags |
Dedicated 6×9″ mid-bass for the saddlebag lids of 2024+ H-D® Touring — speakers and cut-in kit in one bundle
September bundle offer — ends 30 September 2026.
This bundle pairs the Cicada Audio® CMB69.4 Pro Mid-Bass speakers (4Ω, pair) with the 24CHDLID 6×9″ Saddlebag Lid Cut-In Speaker Kit. On bikes with standard solid saddlebag lids, adding 6×9-inch rear speakers requires either replacement speaker lids or a cut-in lid kit. The 24CHDLID is the cut-in route: you keep your factory painted lids, and the kit supplies the templates, baffles, grilles and gasketing to cut, mount and finish the openings.
What’s in the bundle
- Cicada Audio CMB69.4 — 6×9″ Pro Mid-Bass speakers (pair). 4Ω, 150W RMS, 88 dB sensitivity, Carbon Matrix Composite™ (CMC™) cone, 38 mm Black Coat™ OFC voice coil, die-cast aluminium basket with Vortex Flow Venting™, and Rain or Shine™ all-weather construction.
- Cicada Audio 24CHDLID — 6×9″ saddlebag lid cut-in kit (left and right). Includes a three-part top-load assembly (powder-coated steel grille, angled UV-resistant ASA baffle and gasketed clamping ring), ABS cut-out templates (L/R), die-cut speaker gasketing, lid gasket seals, rainproof lid covers, and tethers with a crossover pouch. Speakers mount in the kit; no lids are supplied.
Who this is for
Riders on 2024+ H-D® Touring models adding an amplified rear stage to the saddlebag lids, who want dedicated mid-bass drivers rather than coaxials in that position, and who run — or are adding — an amplifier with DSP crossover control.
This is the 4Ω version. Choose it if you bridge amplifier channels for the rear pair, or if the rest of your system runs at 4Ω. Bridging halves the load the amplifier sees, so a 4Ω speaker presents 2Ω on a bridged channel — within the rated minimum of amplifiers like the FLX700.4PRO and FLX1400.4PRO. A 4Ω load also draws less current at the same volume, which gives the amplifier more thermal margin on a long, hot day.
Running a 2Ω-stable channel in stereo instead? The CMB69.2 version of this bundle is the one to choose.
What the rear stage adds — and what it doesn’t
The CMB69.4 adds lower-midrange weight and output from the saddlebag lids, with more sound behind the rider and better coverage for a pillion. Levelled and time-aligned properly, it provides rear fill; set too loud or with the wrong delay, it pulls the sound image backwards. It is not a subwoofer or low-bass stage. With the required high-pass in place, the CMB69.4 will not produce deep kick-drum weight or sub-bass.
The CMB69.4 is also a mid-bass driver only — it is specified to 1 kHz and has no tweeter. On its own in the lid it covers the lower midrange. For a two-way rear stage, add a tweeter pair on the 24CHD69TB tweeter bridge, crossed over through your DSP.
On the road: more output and presence from behind at highway speed, and a pillion who can actually hear the system — provided it is tuned to support the front speakers rather than compete with them.
⚠️ Before you order: a high-pass crossover and an external amplifier are required
The CMB69.4 must not be run full-range or from factory radio power. In a sealed saddlebag lid, the required high-pass is 250 Hz @ 24 dB/octave, or 300 Hz @ 12 dB/octave minimum. Lower settings in a sealed lid risk over-excursion and permanent damage to the driver.
How to check your system: if your amplifier has built-in DSP (FLX700.4PRO, FLX1400.4PRO) or you run a DSP412PRO, you can set the high-pass in the tuning software. If your amplifier’s crossover can’t reach 250 Hz @ 24 dB/octave (or 300 Hz @ 12 dB/octave), you’ll need a DSP or a passive high-pass filter at the correct frequency. Correct crossover, gain and limiter settings matter here — if you’re unsure, contact us before ordering and we’ll check it against your setup.
What else you’ll need
- An amplifier with DSP crossover control — the FLX700.4PRO or FLX1400.4PRO, or a DSP412PRO ahead of your existing amplifier.
- A signal source for the amplifier — 2024+ Touring models running Skyline OS need an A2B interface such as the NAV-TV ZEN-H to feed an aftermarket amplifier.
- Lid speaker wiring to suit where your amplifier is mounted — contact us and we’ll confirm the right harness for your bike.
- Optional, for a two-way rear stage — the 24CHD69TB tweeter bridge with RR075T tweeters.
Fitment
| Bike | 2024+ H-D® Touring models with standard solid saddlebag lids, including Street Glide® and Road Glide® |
| Position | Saddlebag lids — cut-in (permanent modification to the lid; templates included) |
| Not compatible | 2014–2023 H-D® saddlebag lids |
| Speaker cutout / depth | 145 × 216 mm (5.7″ × 8.5″) / 99 mm (3.9″) |
Cutting a factory lid is permanent. The ABS templates in the kit are there to get the openings right first time, and we recommend professional installation if you haven’t cut lids before.
The bottom line
A dedicated 4Ω 6×9″ mid-bass pair and the matching cut-in kit for 2024+ H-D® Touring saddlebag lids, bundled for September. It adds output and rear coverage to an amplified, DSP-controlled system — set the high-pass before first power-up. Running a 2Ω-stable channel in stereo? See the CMB69.2 version. Questions about your system? Call us on 07 3350 1354 or email sales@motorcycleaudio.com.au.
Bundle offer ends 30 September 2026.
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer's responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We'll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you're unsure about compatibility, reach out before ordering—we're happy to help.