Bigger Speakers. Heavier Amps. Brackets That Can Take It.
The Alloy Art SAB-1 Strong Arm Inner Fairing Brackets are a direct OEM replacement for 1996–2013 Harley-Davidson® Touring models — designed specifically to handle the additional weight of aftermarket speakers and amplifiers that factory brackets were never engineered to support. Made from injection-moulded high-impact nylon with a pocketed ribbed design, they are lighter than stock while delivering more rigidity where it counts. Sold as a pair. Made in the USA.
The factory inner fairing brackets on 1996–2013 Harley Touring bikes were designed around the weight of the OEM speaker units. Upgrade to heavier aftermarket drivers or mount an amplifier inside the fairing, and those brackets flex — creating vibration, rattle, and instability that follows you down every highway kilometre.
The SAB-1 is the fix. A pocketed ribbed nylon construction that is stronger than the factory part, lighter than it, and engineered to hold a properly specced audio system without movement.
Why These Brackets Matter
- Built for aftermarket weight: Factory brackets were not designed for upgraded speakers or additional amplifier mass — the SAB-1 is. Eliminates the flex that causes rattle and resonance with heavier audio hardware.
- Pocketed ribbed design: The rib and pocket structure distributes load across the bracket rather than concentrating stress at mounting points — the same principle used in structural engineering to deliver rigidity without mass.
- Lighter than OEM: High-impact nylon achieves greater rigidity than the factory part at lower weight — less unsprung mass in the fairing structure.
- Reduces fairing vibration: Better bracket rigidity reduces the micro-movement that generates vibration noise inside the fairing at speed.
- Direct OEM replacement: Replaces OEM # 58478-96 & 58479-96 — drops straight in, no modification required.
- Made in the USA: Designed, manufactured, and assembled in Southern California.
System Integration
The SAB-1 is a foundation component for any fairing audio upgrade on 1996–2013 Harley Touring. Speaker and amplifier weight is transferred directly through the inner fairing brackets — installing heavier audio hardware on factory brackets that were not rated for it is a common source of rattle and long-term bracket failure.
- Speaker upgrades: Recommended any time aftermarket 6.5-inch fairing speakers are installed — particularly component kits with separate tweeters or heavier magnet assemblies.
- Amplifier installs: If an amplifier is being mounted inside the fairing, upgrade the brackets at the same time.
- Installation: Direct swap for OEM 58478-96 & 58479-96. No cutting, drilling, or modification required.
Technical Specifications
| SAB-1 — Inner Fairing Brackets | |
|---|---|
| SKU | SAB-1 |
| Material | Injection-moulded high-impact nylon |
| Design | Pocketed ribbed construction |
| Weight | Lighter than OEM |
| Replaces OEM | # 58478-96 & 58479-96 |
| Quantity | Sold as a pair |
| Origin | Made in the USA |
What This Is Best For
- Aftermarket speaker installs: Any 1996–2013 Touring build where stock fairing speakers are being replaced with heavier aftermarket units — particularly component kits.
- Amplifier-in-fairing builds: Where an amplifier is being mounted inside the fairing cavity and additional structural support is needed.
- Rattle diagnosis and repair: If fairing rattle has developed after a speaker upgrade and the source is bracket flex, this is the direct fix.
- Preventative upgrades: Upgrading brackets at the same time as speakers to avoid vibration issues before they develop.
- OEM bracket replacement: Replacing cracked or worn factory brackets as part of a full fairing audio rebuild.
Fitment
| Compatible 1996–2013 Harley-Davidson® Touring Models | |
|---|---|
| Electra Glide (all models) | 1996–2013 |
| Ultra Glide (all models) | 1996–2013 |
| Street Glide | 2006–2013 |
Replaces OEM # 58478-96 & 58479-96. Confirm OEM part numbers against your specific model before ordering.
The Bottom Line
The SAB-1 is a direct, no-modification replacement for the inner fairing brackets on 1996–2013 Harley Touring bikes — built to handle the weight of aftermarket speakers and amplifiers that the factory part was never designed to support. If you are upgrading the audio, upgrade the brackets.
Australia Shipping:
- Under $500 → $19.95
- $500–$2,500 → $14.95
- Over $2,500 → FREE
- Bulky items → +$24.95 surcharge (waived over $2,500)
Fast dispatch from Brisbane. Same-day shipping on in-stock orders before 1pm AEST.
Change-of-mind returns: We accept returns within 7 days of delivery on unused, unopened products in original sealed packaging. Restocking fees apply (20–30%). Return shipping is the customer's responsibility.
No returns on opened audio gear, installed items, custom orders, or special-order products. Please check fitment carefully before installing.
Faulty or incorrect items: If you experience an issue, contact us with photos/video and your order number. We'll assess the claim and arrange repair, replacement, or refund for verified faults under the Australian Consumer Law.
Fitment assistance: If you're unsure about compatibility, reach out before ordering—we're happy to help.